id | lang | string |
---|
64208 | 0 | Color not in color table |
64209 | 0 | Invalid Bits Per Pixel value |
64210 | 0 | Color table is empty |
64211 | 0 | Image is empty |
64212 | 0 | Frame contains multiple Graphic Control Extension blocks |
64213 | 0 | Missing, invalid or empty palette |
64214 | 0 | GIF Image |
64215 | 0 | Loading |
64216 | 0 | Saving |
64217 | 0 | Converting |
64218 | 0 | Rendering |
64219 | 0 | Copying |
64220 | 0 | Optimizing |
64224 | 0 | Decoder bit buffer under-run |
64225 | 0 | Circular decoder table entry |
64226 | 0 | Invalid Image trailer |
64227 | 0 | Internal error: Extension Instance does not match Extension Label |
64228 | 0 | Unsupported Application Extension block size |
64229 | 0 | Unknown GIF block type |
64230 | 0 | Object type not supported for operation |
64231 | 0 | Invalid GIF data |
64232 | 0 | Invalid image size |
64233 | 0 | Image exceeds Logical Screen size |
64234 | 0 | No global or local color table defined |
64235 | 0 | Invalid pixel coordinates |
64236 | 0 | Unsupported PixelFormat |
64237 | 0 | Invalid image dimensions |
64238 | 0 | Image has no DIB |
64239 | 0 | Invalid stream operation |
64240 | 0 | No credential handle acquired |
64241 | 0 | Can not change credentials after handle aquired. Use Release first |
64242 | 0 | Unknown credentials use |
64243 | 0 | Do AcquireCredentialsHandle first |
64244 | 0 | CompleteAuthToken is not supported |
64245 | 0 | Premature end of data |
64246 | 0 | Color table overflow |
64247 | 0 | Invalid color index |
64248 | 0 | Invalid color index - color map expanded |
64249 | 0 | Cannot save empty GIF |
64250 | 0 | Invalid GIF signature |
64251 | 0 | Invalid number of colors specified in Screen Descriptor |
64252 | 0 | Invalid number of colors specified in Image Descriptor |
64253 | 0 | Unknown extension type |
64254 | 0 | Invalid extension introducer |
64255 | 0 | Failed to allocate memory for GIF DIB |
64256 | 0 | The revocation status of the domain controller certificate used for smartcard authentication could not be determined. There is additional information in the system event log. Please contact your system administrator. |
64257 | 0 | An untrusted certificate authority was detected while processing the domain controller certificate used for authentication. There is additional information in the system event log. Please contact your system administrator. |
64258 | 0 | The domain controller certificate used for smartcard logon has expired. Please contact your system administrator with the contents of your system event log. |
64259 | 0 | The domain controller certificate used for smartcard logon has been revoked. Please contact your system administrator with the contents of your system event log. |
64260 | 0 | A signature operation must be performed before the user can authenticate. |
64261 | 0 | One or more of the parameters passed to the function was invalid. |
64262 | 0 | Client policy does not allow credential delegation to target server. |
64263 | 0 | Client policy does not allow credential delegation to target server with NLTM only authentication. |
64264 | 0 | The recipient rejected the renegotiation request. |
64265 | 0 | The required security context does not exist. |
64266 | 0 | The PKU2U protocol encountered an error while attempting to utilize the associated certificates. |
64267 | 0 | The identity of the server computer could not be verified. |
64268 | 0 | Unknown error |
64269 | 0 | SSPI %s returns error #%d(0x%x): %s |
64270 | 0 | SSPI interface has failed to initialise properly |
64271 | 0 | No PSecPkgInfo specified |
64272 | 0 | The KDC was unable to generate a referral for the service requested. |
64273 | 0 | The encryption type requested is not supported by the KDC. |
64274 | 0 | An unsupported preauthentication mechanism was presented to the Kerberos package. |
64275 | 0 | The requested operation cannot be completed. The computer must be trusted for delegation and the current user account must be configured to allow delegation. |
64276 | 0 | Client's supplied SSPI channel bindings were incorrect. |
64277 | 0 | The received certificate was mapped to multiple accounts. |
64278 | 0 | SEC_E_NO_KERB_KEY |
64279 | 0 | The certificate is not valid for the requested usage. |
64280 | 0 | The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you. |
64281 | 0 | The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log. |
64282 | 0 | An untrusted certificate authority was detected While processing the smartcard certificate used for authentication. Please contact your system administrator. |
64283 | 0 | The revocation status of the smartcard certificate used for authentication could not be determined. Please contact your system administrator. |
64284 | 0 | The smartcard certificate used for authentication was not trusted. Please contact your system administrator. |
64285 | 0 | The smartcard certificate used for authentication has expired. Please contact your system administrator. |
64286 | 0 | The Kerberos subsystem encountered an error. A service for user protocol request was made against a domain controller which does not support service for user. |
64287 | 0 | An attempt was made by this server to make a Kerberos constrained delegation request for a target outside of the server's realm. This is not supported, and indicates a misconfiguration on this server's allowed to delegate to list. Please contact your administrator. |
64288 | 0 | The client and server cannot communicate, because they do not possess a common algorithm. |
64289 | 0 | The security context could not be established due to a failure in the requested quality of service (e.g. mutual authentication or delegation). |
64290 | 0 | A security context was deleted before the context was completed. This is considered a logon failure. |
64291 | 0 | The client is trying to negotiate a context and the server requires user-to-user but didn't send a TGT reply. |
64292 | 0 | Unable to accomplish the requested task because the local machine does not have any IP addresses. |
64293 | 0 | The supplied credential handle does not match the credential associated with the security context. |
64294 | 0 | The crypto system or checksum function is invalid because a required function is unavailable. |
64295 | 0 | The number of maximum ticket referrals has been exceeded. |
64296 | 0 | The local machine must be a Kerberos KDC (domain controller) and it is not. |
64297 | 0 | The other end of the security negotiation is requires strong crypto but it is not supported on the local machine. |
64298 | 0 | The KDC reply contained more than one principal name. |
64299 | 0 | Expected to find PA data for a hint of what etype to use, but it was not found. |
64300 | 0 | The client certificate does not contain a valid UPN, or does not match the client name in the logon request. Please contact your administrator. |
64301 | 0 | Smartcard logon is required and was not used. |
64302 | 0 | A system shutdown is in progress. |
64303 | 0 | An invalid request was sent to the KDC. |
64304 | 0 | The requested security package does not exist |
64305 | 0 | The context has expired and can no longer be used. |
64306 | 0 | The supplied message is incomplete. The signature was not verified. |
64307 | 0 | The credentials supplied were not complete, and could not be verified. The context could not be initialized. |
64308 | 0 | The buffers supplied to a function was too small. |
64309 | 0 | The credentials supplied were not complete, and could not be verified. Additional information can be returned from the context. |
64310 | 0 | The context data must be renegotiated with the peer. |
64311 | 0 | The target principal name is incorrect. |
64312 | 0 | There is no LSA mode context associated with this context. |
64313 | 0 | The clocks on the client and server machines are skewed. |
64314 | 0 | The certificate chain was issued by an untrusted authority. |
64315 | 0 | The message received was unexpected or badly formatted. |
64316 | 0 | An unknown error occurred while processing the certificate. |
64317 | 0 | The received certificate has expired. |
64318 | 0 | The specified data could not be encrypted. |
64319 | 0 | The specified data could not be decrypted. |
64320 | 0 | The caller is not the owner of the desired credentials |
64321 | 0 | The security package failed to initialize, and cannot be installed |
64322 | 0 | The token supplied to the function is invalid |
64323 | 0 | The security package is not able to marshall the logon buffer, so the logon attempt has failed |
64324 | 0 | The per-message Quality of Protection is not supported by the security package |
64325 | 0 | The security context does not allow impersonation of the client |
64326 | 0 | The logon attempt failed |
64327 | 0 | The credentials supplied to the package were not recognized |
64328 | 0 | No credentials are available in the security package |
64329 | 0 | The message or signature supplied for verification has been altered |
64330 | 0 | The message supplied for verification is out of sequence |
64331 | 0 | No authority could be contacted for authentication. |
64332 | 0 | The function completed successfully, but must be called again to complete the context |
64333 | 0 | The function completed successfully, but CompleteToken must be called |
64334 | 0 | The function completed successfully, but both CompleteToken and this function must be called to complete the context |
64335 | 0 | The logon was completed, but no network authority was available. The logon was made using locally known information |
64336 | 0 | Accept Error |
64337 | 0 | Accept Failed |
64338 | 0 | Accept Exit |
64339 | 0 | Connect Loop |
64340 | 0 | Connect Error |
64341 | 0 | Connect Failed |
64342 | 0 | Connect Exit |
64343 | 0 | Handshake Start |
64344 | 0 | Handshake Done |
64345 | 0 | Successfull API call |
64346 | 0 | Not enough memory is available to complete this request |
64347 | 0 | The handle specified is invalid |
64348 | 0 | The function requested is not supported |
64349 | 0 | The specified target is unknown or unreachable |
64350 | 0 | The Local Security Authority cannot be contacted |
64351 | 0 | The requested security package does not exist |
64352 | 0 | Protocol field is empty |
64353 | 0 | Host field is empty |
64354 | 0 | '%s' is not a valid property value |
64355 | 0 | OLE control activation failed |
64356 | 0 | Could not obtain OLE control window handle |
64357 | 0 | License information for %s is invalid |
64358 | 0 | License information for %s not found. You cannot use this control in design mode |
64359 | 0 | Unable to retrieve a pointer to a running object registered with OLE for %s/%s |
64360 | 0 | Failed to load %s. |
64361 | 0 | Mode has not been set. |
64362 | 0 | Could not load SSL library. |
64363 | 0 | SSL status: "%s" |
64364 | 0 | %s Alert |
64365 | 0 | %s Read Alert |
64366 | 0 | %s Write Alert |
64367 | 0 | Accept Loop |
64368 | 0 | Reply Code already exists: %s |
64369 | 0 | Algorithm %s not permitted in FIPS mode |
64370 | 0 | Unsupported hash algorithm. This implementation supports only MD5 encoding. |
64371 | 0 | Error accepting connection with SSL. |
64372 | 0 | Error connecting with SSL. |
64373 | 0 | SetCipher failed. |
64374 | 0 | Error creating SSL session. |
64375 | 0 | Error creating SSL context. |
64376 | 0 | Could not load root certificate. |
64377 | 0 | Could not load certificate. |
64378 | 0 | Could not load key, check password. |
64379 | 0 | Could not load DH Parameters. |
64380 | 0 | Error getting SSL method. |
64381 | 0 | Error setting File Descriptor for SSL |
64382 | 0 | Error binding data to SSL socket. |
64383 | 0 | EOF was observed that violates the protocol |
64384 | 0 | Max line read attempts exceeded. |
64385 | 0 | Max line length exceeded. |
64386 | 0 | Set LargeStream to True to send streams greater than 2GB |
64387 | 0 | Data is too large for stream |
64388 | 0 | Connect timed out. |
64389 | 0 | Cannot call TerminateAndWaitFor on FreeAndTerminate threads |
64390 | 0 | Already connected. |
64391 | 0 | Maximum number of line allowed exceeded |
64392 | 0 | The IOHandler already has a different Intercept assigned |
64393 | 0 | Transparent proxy cannot bind. |
64394 | 0 | UDP Not supported by this proxy. |
64395 | 0 | Buffer terminator must be specified. |
64396 | 0 | Buffer start position is invalid. |
64397 | 0 | Cannot change a connected IOHandler. |
64398 | 0 | No IOHandler of type %s is installed. |
64399 | 0 | Reply Code is not valid: %s |
64400 | 0 | General SOCKS server failure. |
64401 | 0 | Connection not allowed by ruleset. |
64402 | 0 | Network unreachable. |
64403 | 0 | Host unreachable. |
64404 | 0 | Connection refused. |
64405 | 0 | TTL expired. |
64406 | 0 | Command not supported. |
64407 | 0 | Address type not supported. |
64408 | 0 | %s: Circular links are not allowed |
64409 | 0 | Not enough data in buffer. (%d/%d) |
64410 | 0 | Too much data in buffer. |
64411 | 0 | File "%s" not found |
64412 | 0 | Not Connected |
64413 | 0 | Object type not supported. |
64414 | 0 | No data to read. |
64415 | 0 | Read timed out. |
64416 | 0 | Could not bind socket. Address and port are already in use. |
64417 | 0 | Invalid Port Range (%d - %d) |
64418 | 0 | %s is not a valid service. |
64419 | 0 | %s is not a valid IPv6 address |
64420 | 0 | The requested IPVersion / Address family is not supported. |
64421 | 0 | Not all bytes sent. |
64422 | 0 | Package Size Too Big. |
64423 | 0 | Set Size Exceeded. |
64424 | 0 | UDP is not support in this SOCKS version. |
64425 | 0 | Request rejected or failed. |
64426 | 0 | Request rejected because SOCKS server cannot connect. |
64427 | 0 | Request rejected because the client program and identd report different user-ids. |
64428 | 0 | Unknown socks error. |
64429 | 0 | Socks server did not respond. |
64430 | 0 | Invalid socks authentication method. |
64431 | 0 | Authentication error to socks server. |
64432 | 0 | Cannot send or receive after socket is closed. |
64433 | 0 | Too many references, cannot splice. |
64434 | 0 | Connection timed out. |
64435 | 0 | Connection refused. |
64436 | 0 | Too many levels of symbolic links. |
64437 | 0 | File name too long. |
64438 | 0 | Host is down. |
64439 | 0 | No route to host. |
64440 | 0 | Directory not empty |
64441 | 0 | Host not found. |
64442 | 0 | Stack Class is undefined. |
64443 | 0 | Stack already created. |
64444 | 0 | Only one TIdAntiFreeze can exist per application. |
64445 | 0 | Cannot change IPVersion when connected |
64446 | 0 | Can not bind in port range (%d - %d) |
64447 | 0 | Connection Closed Gracefully. |
64448 | 0 | Bad protocol option. |
64449 | 0 | Protocol not supported. |
64450 | 0 | Socket type not supported. |
64451 | 0 | Operation not supported on socket. |
64452 | 0 | Protocol family not supported. |
64453 | 0 | Address family not supported by protocol family. |
64454 | 0 | Address already in use. |
64455 | 0 | Cannot assign requested address. |
64456 | 0 | Network is down. |
64457 | 0 | Network is unreachable. |
64458 | 0 | Net dropped connection or reset. |
64459 | 0 | Software caused connection abort. |
64460 | 0 | Connection reset by peer. |
64461 | 0 | No buffer space available. |
64462 | 0 | Socket is already connected. |
64463 | 0 | Socket is not connected. |
64464 | 0 | Disconnected. |
64465 | 0 | %s |
64466 | 0 | Socket Error # %d
%s |
64467 | 0 | Interrupted system call. |
64468 | 0 | Bad file number. |
64469 | 0 | Access denied. |
64470 | 0 | Buffer fault. |
64471 | 0 | Invalid argument. |
64472 | 0 | Too many open files. |
64473 | 0 | Operation would block. |
64474 | 0 | Operation now in progress. |
64475 | 0 | Operation already in progress. |
64476 | 0 | Socket operation on non-socket. |
64477 | 0 | Destination address required. |
64478 | 0 | Message too long. |
64479 | 0 | Protocol wrong type for socket. |
64480 | 0 | Value may not be zero |
64481 | 0 | The Max value must be > or = Min value |
64482 | 0 | ! ! ! |
64483 | 0 | Invalid source array |
64484 | 0 | Invalid destination array |
64485 | 0 | Character index out of bounds (%d) |
64486 | 0 | Invalid count (%d) |
64487 | 0 | Invalid destination index (%d) |
64488 | 0 | Invalid codepage (%d) |
64489 | 0 | Failed attempting to retrieve time zone information. |
64490 | 0 | Error on call to Winsock2 library function %s |
64491 | 0 | Error on loading Winsock2 library (%s) |
64492 | 0 | Resolving hostname %s. |
64493 | 0 | Connecting to %s. |
64494 | 0 | Connected. |
64495 | 0 | Disconnecting. |
64496 | 0 | Incorrect format used in motion data file (NSTEP MOTIONTYPE) |
64497 | 0 | Incorrect format used in motion data file (TIME MOTION VEL ACC) |
64498 | 0 | FORCEVECTOR internal error |
64499 | 0 | Convergence Problem --> Analysis stopped |
64500 | 0 | Relative location of inertia must be between 0 and 1 |
64501 | 0 | Missing closing bracket in arithmetic expression |
64502 | 0 | Missing opening bracket in arithmetic expression |
64503 | 0 | Problem reading number in arithmetic expression |
64504 | 0 | Unexpected end of arithmetic expression |
64505 | 0 | Unexpected symbol in arithmetic expression |
64506 | 0 | Run Time Error during evaluation of arithmetic expression |
64507 | 0 | Non-closed belt can not transduce PRETENSION: set this value to zero |
64508 | 0 | Error |
64509 | 0 | Numeric format error |
64510 | 0 | Numeric must be in range |
64511 | 0 | Out of range error |
64512 | 0 | Delta-Time must be larger than 0 |
64513 | 0 | Number of steps must be at least 1 |
64514 | 0 | Length of Slider must be positive |
64515 | 0 | Number of input steps differs from previous input |
64516 | 0 | Maximum number of forces exceeded |
64517 | 0 | Inertia must be > 0.0 |
64518 | 0 | Not enough memory to load input file --> remove all TSR programs |
64519 | 0 | 11032 discarded |
64520 | 0 | Maximum number of Iterations must be > 1 |
64521 | 0 | Tolerance must be > 0.0 |
64522 | 0 | No dyad intersection possible --> check node numbers and lengths |
64523 | 0 | Coincident nodes in definition of local coordinate system |
64524 | 0 | Force analysis requested, but no force or inertia data present |
64525 | 0 | no input motion |
64526 | 0 | Missing or incorrect name of motion data file |
64527 | 0 | Unable to open motion data file |
64528 | 0 | Not enough parameters |
64529 | 0 | Title too long |
64530 | 0 | Not enough memory to store input motion --> Reduce number of steps |
64531 | 0 | Too many output items selected |
64532 | 0 | Unknown node number |
64533 | 0 | Unknown element number |
64534 | 0 | Node number already exists |
64535 | 0 | Element number already exists |
64536 | 0 | Incorrect node type |
64537 | 0 | Illegal position parameter |
64538 | 0 | Illegal form parameter |
64539 | 0 | Maximum number of input definitions exceeded |
64540 | 0 | Illegal element dimension |
64541 | 0 | Maximum number of position parameters exceeded |
64542 | 0 | Maximum number of elements exceeded |
64543 | 0 | Maximum number of deformation parameters exceeded |
64544 | 0 | Optimization target has been set to: Maximize. Violating the constraint(s) must result in a negative penalty value. |
64545 | 0 | The selected Polyline or Bézier is part of a group and can not be used. Please ungroup. |
64546 | 0 | Row cannot be deleted: a poly-Bézier curve must have at least 4 control points |
64547 | 0 | When deleting a point from a poly-Bézier curve, SAM will also delete the associated direction control points |
64548 | 0 | Deleting a direction control point from a poly-Bézier curve is not allowed |
64549 | 0 | When adding a point in a poly-Bézier curve, SAM will automatically also add 2 direction control points |
64550 | 0 | The imported table has a wrong number of lines: a poly-Bézier curve is defined by (nSegments * 3) + 1 |
64551 | 0 | Number of points in the file exceeds the limit.
The total number of points describing a polyline or a Bézier curve is limited to 1000.
This includes the control points that are automatically generated when importing Bézier points only.
When importing Bézier points only, the file should not contain more than 333 points |
64552 | 0 | Reading results failed |
64553 | 0 | Analysis Error / Warning |
64554 | 0 | Analysis Ready |
64555 | 0 | Analysis Running |
64556 | 0 | File not found |
64557 | 0 | Invalid keyword |
64558 | 0 | Incorrect format |
64559 | 0 | Too many parameters |
64560 | 0 | Property |
64561 | 0 | Min |
64562 | 0 | Max |
64563 | 0 | Unit |
64564 | 0 | X Position |
64565 | 0 | Y Position |
64566 | 0 | Undo levelcount has been changed: all history is cleared |
64567 | 0 | The Light and Standard editions of SAM do not support optimization.
All related features are enabled, but the optimization process can not be excecuted. |
64568 | 0 | This license does not support kinetostatics (force and torque analysis).
All related features are enabled, but the force calculations are not performed. |
64569 | 0 | A spline needs at least two succeeding points |
64570 | 0 | Please note that the first boundary condition always corresponds to t=t1, which in your case is unequal to zero. |
64571 | 0 | Elements are globally set to [Hide], the local setting is ignored |
64572 | 0 | The non-linear spring exceeds its defined range (force=0 outside the range). |
64573 | 0 | None of the reference points are located within the current view |
64574 | 0 | The reference file should contain at least 3 points |
64575 | 0 | The reference file has an error in line: |
64576 | 0 | Nexperiments should not be smaller than Population Size |
64577 | 0 | SAM update |
64578 | 0 | revision |
64579 | 0 | Connection to the ARTAS website failed. |
64580 | 0 | Uncheck the preferences setting in the section "Other" to avoid this failure. |
64581 | 0 | Please inform your system manager to perform the update |
64582 | 0 | 1. Updating to a new revision of your current version is free of charge.
2. Upgrading to a higher version might involve costs. This depends on your license duration and type:
PERPETUAL LICENSE
Upgrading costs are involved (see pricelist on our website).
ANNUAL LICENSE
Node-Locked: Upgrade is free of charge. You can request new activation key anddownload/install new version (admin rights required).
Floating/Network: Upgrade is free of charge. Your IT-department can request new activationkey and coordinate the roll-out (server & client). |
64583 | 0 | Evolutionary |
64584 | 0 | Simplex |
64585 | 0 | Canceled |
64586 | 0 | - Limit reached |
64587 | 0 | - Converged |
64588 | 0 | Local optimization (Evolutionary) |
64589 | 0 | Local optimization (Simplex) |
64590 | 0 | Optimize Ref. |
64591 | 0 | Reference file: |
64592 | 0 | Element |
64593 | 0 | Function |
64594 | 0 | Table |
64595 | 0 | Argument |
64596 | 0 | Incorrect settings for optimization objective (Elem nr, Node nr, Ref. File) |
64597 | 0 | No variables defined for optimization |
64598 | 0 | Too many parameters for optimization using the Simplex algorithm |
64599 | 0 | Incorrect initialisation for optimization (node outside area, or analysis incomplete) |
64600 | 0 | When maximizing the objective function, refinement with Simplex is disabled.
Refinement is set to "Evolutionary" |
64601 | 0 | Reference file for optimization not found: |
64602 | 0 | Reference file for optimization has no timing data: |
64603 | 0 | Reference file for optimization may not have timing data: |
64604 | 0 | Optimization reference file is not found in the originating directory.
The optimization reference file is read from the current directory |
64605 | 0 | The definition of the penalty should result in one single number,
for example by calculating the min or max of an array.
Since this is not the case, the first element of the current array is being used. |
64606 | 0 | The optimization penalty function is not valid anymore.
Correct the user defined expression for: |
64607 | 0 | The selected user defined expression is currently not valid.
Correct the user defined expression for: |
64608 | 0 | The animation direction changes when end or beginning of motion is reached |
64609 | 0 | Creating Video |
64610 | 0 | Video recording is stopped |
64611 | 0 | (Speed run = ON) |
64612 | 0 | Elements |
64613 | 0 | Element groups |
64614 | 0 | Nodes |
64615 | 0 | Angles |
64616 | 0 | Input motions |
64617 | 0 | Motion steps |
64618 | 0 | Graphic groups |
64619 | 0 | Shapes |
64620 | 0 | Shape |
64621 | 0 | Points |
64622 | 0 | Display of this entity type is switched off in the menu Display > Options.
Switch it ON now? |
64623 | 0 | Analysis time [ms] |
64624 | 0 | Error in function "distance" |
64625 | 0 | Variable name error: |
64626 | 0 | You have changed the engineering units. Please check the validity of the unit strings of the user defined results |
64627 | 0 | trigonometric functions take RADIANS as input and the output values of inverse trigonometric functions is also in RADIANS |
64628 | 0 | log(x) is the natural logarithm of x, exp(x) implements e to the power of x, as e^x |
64629 | 0 | gtz(x) results in 1.0 if x>=0, else 0.0 |
64630 | 0 | sign(x) results in -1.0 if x<0, else 1.0 |
64631 | 0 | sqrt(x) returns the square root of x. If x<0, the result is set to 0.0, and a warning is displayed |
64632 | 0 | distance (object1, object2) measures the distance between two objects. These objects can be shapes(s1,s2,...), elements (e1,e2,...), nodes (n1,n2,...) or points (p1,p2,...). |
64633 | 0 | int(x) yields the integral value of x over the complete time period |
64634 | 0 | determines the min value |
64635 | 0 | determines the max value |
64636 | 0 | calculates the mean value |
64637 | 0 | ddt(x) calculates the discrete time derivative (x(t+dt)-x(t))/dt, which is an approximation of reality |
64638 | 0 | Uncheck Realtime Animation to enable this option |
64639 | 0 | The animation speed corresponds to the input motion |
64640 | 0 | Use dot "." instead of comma "," |
64641 | 0 | Operator expected |
64642 | 0 | Missing parenthesis in formula |
64643 | 0 | The use of "{}", "[]" and "<>" is not supported |
64644 | 0 | Function, "-" or variable expected |
64645 | 0 | The functions min,max,mean,int,first,last,rms,ddt and intf may not be part of a larger expression |
64646 | 0 | is a reserved word |
64647 | 0 | Non-existing element number in variable |
64648 | 0 | Property not available for element |
64649 | 0 | Node not found for variable |
64650 | 0 | Node not found |
64651 | 0 | Point not found |
64652 | 0 | Shape not found |
64653 | 0 | This shape type is not available for distance calculation (Bézier, Text) |
64654 | 0 | Only the beam and slider elements are available for distance calculation |
64655 | 0 | Property not available for node |
64656 | 0 | Unable to create Freudenstein mechanism |
64657 | 0 | Unable to create Burmester mechanism |
64658 | 0 | Unable to create a mechanism from the entered data |
64659 | 0 | Plot |
64660 | 0 | Name |
64661 | 0 | row: |
64662 | 0 | Formula |
64663 | 0 | Error in formula in row: |
64664 | 0 | No name defined in row: |
64665 | 0 | does not comply with the naming requirements |
64666 | 0 | Protected formula name used in row: |
64667 | 0 | Duplicate name used |
64668 | 0 | Circular reference between %s and %s |
64669 | 0 | The formula editor is only available in the PROFESSIONAL version |
64670 | 0 | Unknown error in formula |
64671 | 0 | Number expected |
64672 | 0 | Based on the specified pairs of input/output angles a 4 bar mechanism is synthesized (Freudenstein). Some combinations of specified input/output angles are such that the resulting mechanism can not reach all positions without being dis-assembled. In such a case, a new equivalent solution is found by shifting all input or output angles. |
64673 | 0 | Based on the three specified positions/angles of the coupler point C and the base pivots Ao and Bo, a bar mechanism is synthesized (Burmester approach). Some combinations of specified inputs are such that the resulting mechanism can not reach all positions without being dis-assembled. Also it might be necessary to invert the direction of the input motion. |
64674 | 0 | Based on the three specified positions of the circlepoints A and B and the base pivots Ao and Bo, a 4 bar mechanism is synthesized (Burmester approach). Some combinations of specified inputs are such that the resulting mechanism can not reach all positions without being dis-assembled. Also it might be necessary to invert the direction of the input motion. |
64675 | 0 | This is the most typical configuration of a WATT mechanism (identical lengths of the horizontal linkages and coupler point located midway along the vertical linkage). However, the length of the horizontal linkages does not necessarily have to be identical as long as the coupler point is located accordingly on the vertical linkage (see manual). |
64676 | 0 | No comment |
64677 | 0 | By increasing the ratio of the height of the mechanism to its width, the accuracy of the motion may be increased |
64678 | 0 | This approximated straight line mechanism is derived from the exact straight line slider-crank mechanism (type-1 in wizard "Exact Linear Guiding"). The length b may be chosen freely, however a larger value reduces the deviation of the coupler point from a straight line. |
64679 | 0 | The coupler point for this mechanism has nearly constant velocity along the center portion of the straight line motion (when driving the crank). Applying a x-input motion at the coupler is not adviced. |
64680 | 0 | Symmetric Slider-Crank Mechanism : This mechanism is entirely defined by specifying the length a. |
64681 | 0 | Geared double-crank mechanism : You can specify the values a, b and R. |
64682 | 0 | Hypo-cyclic planetary gear mechanism : The user can only specify the radius R. The ratio 1:2 between the two gears is fixed (in order to obtain a straight line). |
64683 | 0 | Planetary gear-coupled dyad : The user can specify the length a. The ratio 2:1 of the inner and outer gear is fixed (this is essential in order to obtain a straight line), whereas the radius of the middle gear is (arbitrarily) chosen at 0.2*a. The mechanism is modelled with 2 pairs of gears, with 2 overlapping gears at the middle position. |
64684 | 0 | Belt-coupled dyad : The user can specify the length a. The ratio 2:1 of the two wheels is fixed (this is essential in order to obtain a straight line). The radius R is (arbitrarily) chosen at 0.2*a. |
64685 | 0 | After OK you can return to this wizard via F8 |
64686 | 0 | Unable to construct Point B |
64687 | 0 | At least 3 points are needed |
64688 | 0 | Acceleration time |
64689 | 0 | Deceleration time |
64690 | 0 | Max.velocity |
64691 | 0 | Motion |
64692 | 0 | Time |
64693 | 0 | Intervals |
64694 | 0 | Points |
64695 | 0 | Displacement |
64696 | 0 | Velocity |
64697 | 0 | Velocity change |
64698 | 0 | 1st order derivative |
64699 | 0 | 2nd order derivative |
64700 | 0 | Only one curve-part may be defined when using a Motion File: please clear the list of curve-parts |
64701 | 0 | This project uses Input Motion data from a file with the same name
The newly created file is NOT loaded automatically
Motionfile: |
64702 | 0 | This dialog allows you to generate any 4-bar mechanism by specifying all node coordinates. |
64703 | 0 | This dialog allows you to create any 4-bar mechanism by specifying the ground pivots Ao ,Bo, the crank angle alfa and the element dimensions a, b, c, u and v. |
64704 | 0 | Step number |
64705 | 0 | Step |
64706 | 0 | SAM detected a unusual ending of the previous session.
Recover from the last modification ? |
64707 | 0 | Linear |
64708 | 0 | Quadratic |
64709 | 0 | Polynome(3.4.5) |
64710 | 0 | Cycloidal |
64711 | 0 | Motion File |
64712 | 0 | Second Order |
64713 | 0 | Spline 01 |
64714 | 0 | Polynome 5. order |
64715 | 0 | Parameters |
64716 | 0 | Value |
64717 | 0 | Units |
64718 | 0 | Acceleration |
64719 | 0 | Deceleration |
64720 | 0 | Translational power |
64721 | 0 | Angle |
64722 | 0 | Relative angle |
64723 | 0 | Angular velocity |
64724 | 0 | Angular acceleration |
64725 | 0 | Torque |
64726 | 0 | Power |
64727 | 0 | Bearing Force X |
64728 | 0 | Bearing Force Y |
64729 | 0 | Bearing Force Abs |
64730 | 0 | Related to Node: |
64731 | 0 | Rotate Graphics |
64732 | 0 | Rotate Mechanism |
64733 | 0 | Items included in this selection |
64734 | 0 | X-axis value for mirroring |
64735 | 0 | Y-axis value for mirroring |
64736 | 0 | Load selection |
64737 | 0 | Number of rows in table must be at least 2 |
64738 | 0 | Duplicate arguments not allowed |
64739 | 0 | The table contains invalid data |
64740 | 0 | The table is incomplete |
64741 | 0 | The load argument exceeds its defined range (load set to zero outside the range). |
64742 | 0 | disabled |
64743 | 0 | Transmissionratio (R1/R2) |
64744 | 0 | Rel. displacement |
64745 | 0 | Length |
64746 | 0 | Elongation |
64747 | 0 | Elongation velocity |
64748 | 0 | Elongation acceleration |
64749 | 0 | Normal force |
64750 | 0 | Normal force (left) |
64751 | 0 | Normal force (right) |
64752 | 0 | You have entered a license key that is not compatible with the current software version SAM %s which you are trying to activate.
It seems to be a SAM %s license key, so please download the corresponding software version. |
64753 | 0 | License |
64754 | 0 | Reset license to demo? SAM will close |
64755 | 0 | SAM will close now. |
64756 | 0 | Could not find MyDocuments folder location. |
64757 | 0 | SAM Version |
64758 | 0 | DLL Version |
64759 | 0 | Project file version |
64760 | 0 | Project file SAM version |
64761 | 0 | Commandline wrong format: |
64762 | 0 | Force/torque is already defined ! Use Modify |
64763 | 0 | No new force/torque possible |
64764 | 0 | Input Motion |
64765 | 0 | Force Load |
64766 | 0 | Torque Load |
64767 | 0 | Motion selection |
64768 | 0 | This license will expire soon |
64769 | 0 | Are you sure you want to replace the current license ? |
64770 | 0 | Are you sure to transfer the license to this node ?
Please note that the software will no longer run on the previous node. |
64771 | 0 | In the next step you will be asked where to save the NodeID file
Please do not change the preset filename |
64772 | 0 | Press OK to exit SAM.
The next step is to send us the NodeID file, so we can create and send you the final node-locked license key. |
64773 | 0 | The license has been registered and activated successfully |
64774 | 0 | License activation |
64775 | 0 | License check |
64776 | 0 | Unkown error |
64777 | 0 | License expired |
64778 | 0 | Activation/Checkup denied: hardware is different |
64779 | 0 | Activation denied: limit exceeded |
64780 | 0 | Activation denied: license not found |
64781 | 0 | Internet Connection closed |
64782 | 0 | No internet connection or no permission to access the license database on our server.
Press Ok to exit the software, solve the connection/permission issue and try again. |
64783 | 0 | No internet connection or no permission to access the license database on our server.
You can either press Cancel to exit the software, solve the connection/permission issue and try again.
Or you can press OK and follow the instructions (the process involves extraction of the Node ID Info and exchange of data with us via email
such that we can create and send you the final node-locked license key). |
64784 | 0 | Student |
64785 | 0 | Floating |
64786 | 0 | Duplicate user not allowed |
64787 | 0 | All licenses are occupied |
64788 | 0 | License server not connected |
64789 | 0 | License is expired |
64790 | 0 | License service at server has shut down |
64791 | 0 | License received from server has incorrect format |
64792 | 0 | SAM will close, but lets you save your data first. |
64793 | 0 | The floating license needs to be upgraded. Please contact your system manager. |
64794 | 0 | Professional |
64795 | 0 | Standard |
64796 | 0 | Light |
64797 | 0 | Please make sure that you have internet access and that you enter the license data exactly as provided (incl. name or company), or run SAM in demo mode. |
64798 | 0 | The length of the activation key is incorrect |
64799 | 0 | This license is valid until: |
64800 | 0 | USER DEFINED EXPRESSIONS |
64801 | 0 | Result listing |
64802 | 0 | Mechanism |
64803 | 0 | SAM - The Ultimate Mechanism Designer |
64804 | 0 | Graph of selected items |
64805 | 0 | Analysis result file not found: |
64806 | 0 | The license information is incorrect, please enter all data exactly as provided |
64807 | 0 | This license has expired, please contact us via info@artas.nl |
64808 | 0 | The system clock seems to be modified. Your time-limited license will only run with a correct date/time setting of your computer |
64809 | 0 | Due to a license failure, SAM can run in DEMO-mode only |
64810 | 0 | Demo |
64811 | 0 | Trial |
64812 | 0 | Konstruktive Getriebelehre |
64813 | 0 | SAM Trial License: for evaluation / non-commercial use only |
64814 | 0 | Demo License: for evaluation / non-commercial use only |
64815 | 0 | Node Locked |
64816 | 0 | Relative Rotation |
64817 | 0 | Elongation |
64818 | 0 | LOADS |
64819 | 0 | Load Number : |
64820 | 0 | Force |
64821 | 0 | Torque |
64822 | 0 | Mass |
64823 | 0 | Pinion |
64824 | 0 | Rack |
64825 | 0 | Inertia |
64826 | 0 | Gravity |
64827 | 0 | Acceleration : |
64828 | 0 | : None |
64829 | 0 | End |
64830 | 0 | enabled |
64831 | 0 | disabled |
64832 | 0 | control point |
64833 | 0 | Relative Angle |
64834 | 0 | Displacement |
64835 | 0 | Angle |
64836 | 0 | INPUT MOTION |
64837 | 0 | Input Motion Number : |
64838 | 0 | Type |
64839 | 0 | Time |
64840 | 0 | Intervals |
64841 | 0 | Element (Node) : |
64842 | 0 | Profile : |
64843 | 0 | Table : |
64844 | 0 | X-displacement |
64845 | 0 | Y-displacement |
64846 | 0 | Rotation |
64847 | 0 | Absolute Rotation |
64848 | 0 | Total Belt Length : |
64849 | 0 | Node |
64850 | 0 | Element Nr |
64851 | 0 | Stiffness : |
64852 | 0 | Preload : |
64853 | 0 | Unloaded Length : |
64854 | 0 | Damping : |
64855 | 0 | Friction : |
64856 | 0 | Element(s) : |
64857 | 0 | World |
64858 | 0 | Stroke : |
64859 | 0 | Pressure angle : |
64860 | 0 | Pressure angle |
64861 | 0 | FIXATIONS |
64862 | 0 | Fixation Number : |
64863 | 0 | Direction(s) : |
64864 | 0 | Pinion mass moment of inertia |
64865 | 0 | Rack mass moment of inertia |
64866 | 0 | Parameters : |
64867 | 0 | ∆ |
64868 | 0 | (Lo-∆o) < (Li+∆i) |
64869 | 0 | Inertia |
64870 | 0 | Mass : |
64871 | 0 | Pinion mass : |
64872 | 0 | Rack mass : |
64873 | 0 | Relative COG : |
64874 | 0 | Relative distance to first node [0..1] |
64875 | 0 | Relative distance of rack mass to node of rack [0..1] |
64876 | 0 | Rel.distance to rod-end |
64877 | 0 | Total Length : |
64878 | 0 | Nodal Distance : |
64879 | 0 | Radius : |
64880 | 0 | Type : |
64881 | 0 | Argument : |
64882 | 0 | ELEMENTS |
64883 | 0 | Element Number : |
64884 | 0 | Element Label : |
64885 | 0 | Curvetype : |
64886 | 0 | Node(s) : |
64887 | 0 | Nodes |
64888 | 0 | Node Coordinates : |
64889 | 0 | Length : |
64890 | 0 | Angle : |
64891 | 0 | Width : |
64892 | 0 | Height : |
64893 | 0 | Centre : |
64894 | 0 | Inertia at COG : |
64895 | 0 | Mass moment of inertia (at center of gravity) |
64896 | 0 | A DXF template must consist of: POINT, LINE, CIRCLE, ARC, TEXT.
Entities must be entered in this order !. |
64897 | 0 | No intersection of entities found
or some entity is not prepared for intersection calculation. |
64898 | 0 | Intersection is limited to lines and circles |
64899 | 0 | Time [s] |
64900 | 0 | Project Documentation |
64901 | 0 | PROJECT NOTES |
64902 | 0 | GENERAL |
64903 | 0 | File : |
64904 | 0 | Date : |
64905 | 0 | Time : |
64906 | 0 | NODES |
64907 | 0 | Node Number : |
64908 | 0 | Number |
64909 | 0 | Node Label : |
64910 | 0 | X-Coordinate : |
64911 | 0 | Y-Coordinate : |
64912 | 0 | The grid size is too small to display the grid.
Press OK to skip this message next time. |
64913 | 0 | Error searching motion file |
64914 | 0 | Error searching Reference File |
64915 | 0 | Motion file has wrong format |
64916 | 0 | DEMO Version: Limited number of analysis steps (max. 15) |
64917 | 0 | DEMO Version: Save not allowed |
64918 | 0 | DEMO Version: Undo is disabled |
64919 | 0 | DEMO Version: Changes on this example are not allowed.
Select menu FILE > NEW to create a new Mechanism. |
64920 | 0 | DEMO Version : The selected file is locked because it was modified manually |
64921 | 0 | Delete selected inertia? |
64922 | 0 | Delete selected torque? |
64923 | 0 | This group will be un-attached |
64924 | 0 | One attachment per element allowed.
The other graphics group will be detached from this element |
64925 | 0 | Wrong selection for motion file:
The file will be created, but may be invalid for use as a SAM motion file |
64926 | 0 | Selected items are valid and the sequence of items is set to default motion file format |
64927 | 0 | No valid combination of 4 items is available (time,u,v,a) |
64928 | 0 | Elongation can only be applied to BEAM elements |
64929 | 0 | Elongation already defined |
64930 | 0 | Displacement already defined |
64931 | 0 | Max / Min values are illegal |
64932 | 0 | Delete selected force? |
64933 | 0 | Delete selected mass? |
64934 | 0 | Additional logging activated. See file 'your project.LOG'
Hit F7 again to disable logging |
64935 | 0 | Additional logging disabled |
64936 | 0 | Unknown node number |
64937 | 0 | Unknown element number |
64938 | 0 | Merge nodes conflict |
64939 | 0 | Merge denied: |
64940 | 0 | Only nodes of different elements can be merged |
64941 | 0 | both nodes are linked to a force definition |
64942 | 0 | both nodes are linked to a motion definition |
64943 | 0 | one of the merged nodes is linked to an optimization definition |
64944 | 0 | File not found |
64945 | 0 | Open alternative file: |
64946 | 0 | Error in DXF template file |
64947 | 0 | Note |
64948 | 0 | Elements are already fixed, or input motion is defined. |
64949 | 0 | Elements are not connected. |
64950 | 0 | One or both elements have no angles. |
64951 | 0 | The selected file has a wrong format, or is of a wrong version number |
64952 | 0 | The selected file has a wrong format |
64953 | 0 | Incorrect belt dimensions,
enter a larger radius or cancel creation (Right mouse button). |
64954 | 0 | Not every node of this element has an angle. |
64955 | 0 | This element has no Input |
64956 | 0 | Max. number of input blocks exceeded. |
64957 | 0 | Editor not found: select a plain text editor |
64958 | 0 | Angle motion already defined |
64959 | 0 | Angles not connected |
64960 | 0 | Due to a missing motion file the associated rotational motor is removed |
64961 | 0 | row: |
64962 | 0 | The definition of an input motion via an internal table in SAM is no longer supported.
All data is automatically converted to, and loaded from, an external ASCII motion file, such that your analysis results remain unmodified. |
64963 | 0 | As of SAM 8.0 two important changes have been introduced when it comes to input motions:
ROTATION: A new rotation motor element has been introduced, which is used for all rotational input motions. When loading old project files an automatic conversion of the simulation model takes place. In order to avoid misinterpretation of results, previously selected xy-plot items related to the old input motion are automatically deselected.
The user must manually select the items like torque and power of the new rotation motor element for display in the xy-plot.
ELONGATION: The sign of the driving force (normal force FN) in a cylinder has been reversed to be more in line with common practice. |
64964 | 0 | Zoom action has reached the limit |
64965 | 0 | Invalid curve selection |
64966 | 0 | The selected shape must be a Polyline or Bézier curve |
64967 | 0 | The list of curve-parts is empty.
Do you want to add the current profile to the list? |
64968 | 0 | SAM tried to save files on writeprotected (Network-) locations,
which is not allowed.
This problem occurs for: |
64969 | 0 | New analysis required (F9) |
64970 | 0 | mechanism |
64971 | 0 | statically overdetermined |
64972 | 0 | mechanism kinematically indeterminate |
64973 | 0 | Project is modified. Save ? |
64974 | 0 | Saving... |
64975 | 0 | Push OK to select a DXF template |
64976 | 0 | Select 1st corner of rectangle |
64977 | 0 | Select 2nd corner of rectangle |
64978 | 0 | Group |
64979 | 0 | Warning |
64980 | 0 | Unable to fix |
64981 | 0 | Error |
64982 | 0 | Sam-project read error |
64983 | 0 | No input motion possible |
64984 | 0 | Number of timesteps is different in some motions: |
64985 | 0 | End time is different in some motions: |
64986 | 0 | The time-step is 0.0 in some motions/forces: |
64987 | 0 | The following time synchronization between motions is incorrect: |
64988 | 0 | SAM can automatically solve any synchronization issues for you. Go to FILE>PREFERENCES>ANALYSIS and check the box "Merge time steps of all input motions" |
64989 | 0 | Use settings from Display>Options>Colors and Styles |
64990 | 0 | Use settings from Preferences>Display |
64991 | 0 | Displacement or angle at t=0 must be zero. The value is set to zero. |
64992 | 0 | Select radius |
64993 | 0 | Length : |
64994 | 0 | Slider length |
64995 | 0 | Radius : |
64996 | 0 | Ratio : |
64997 | 0 | Closed |
64998 | 0 | Reversed |
64999 | 0 | Opposite belt |
65000 | 0 | Opposite tangent |
65001 | 0 | Internal tooth |
65002 | 0 | Select a motion (node or element) |
65003 | 0 | Select an element or node |
65004 | 0 | Select a node or point |
65005 | 0 | Select a pivot node or point |
65006 | 0 | Move the Mouse [LB] |
65007 | 0 | Mouse selection or TAB [ENTER] |
65008 | 0 | Select 2nd element or anywhere (=mount to frame) |
65009 | 0 | Right Button: cancel |
65010 | 0 | Right Button: Popup menu |
65011 | 0 | Selection ready |
65012 | 0 | Cancel [RB] |
65013 | 0 | |
65014 | 0 | empty |
65015 | 0 | Select a graphic item [LB] |
65016 | 0 | Select a graphic group [LB] |
65017 | 0 | Select a group [LB] |
65018 | 0 | Turn around node, fix [LB], unfix [RB] |
65019 | 0 | Select a node |
65020 | 0 | or use keyboard keys < and >, accept with <Enter> |
65021 | 0 | Select an element |
65022 | 0 | Use [CTRL] + [LB] to collect |
65023 | 0 | Select end point |
65024 | 0 | Fixed Centrode |
65025 | 0 | Moving Centrode |
65026 | 0 | Evolute |
65027 | 0 | Plot/List selection |
65028 | 0 | Export the current selection of results as text |
65029 | 0 | Graph X-Axis selection |
65030 | 0 | Toggle Curves in Graph Left <> Right |
65031 | 0 | Click at curve label |
65032 | 0 | Delete a Curve from Graph |
65033 | 0 | Zoom pan |
65034 | 0 | Zoom rectangle |
65035 | 0 | Select rectangle |
65036 | 0 | About SAM |
65037 | 0 | creation |
65038 | 0 | Select 1st element |
65039 | 0 | Select 2nd element |
65040 | 0 | Motion input (y) |
65041 | 0 | Motion input (angle) |
65042 | 0 | Motion input between angles |
65043 | 0 | Motion input between nodes |
65044 | 0 | Modify motion input |
65045 | 0 | Delete motion input |
65046 | 0 | Force Creation |
65047 | 0 | Torque Creation |
65048 | 0 | Lumped Mass Creation |
65049 | 0 | Inertia Creation |
65050 | 0 | Modify Load |
65051 | 0 | Delete Load |
65052 | 0 | Select optimization variables |
65053 | 0 | Drag rectangle |
65054 | 0 | Nodal path |
65055 | 0 | Nodal velocity vectors |
65056 | 0 | Rotate a group |
65057 | 0 | Attach a group to a mechanism element |
65058 | 0 | Detach a group from an element |
65059 | 0 | Point |
65060 | 0 | Line |
65061 | 0 | Rectangle |
65062 | 0 | PolyLine |
65063 | 0 | Point |
65064 | 0 | point |
65065 | 0 | Bézier |
65066 | 0 | Circle |
65067 | 0 | Intersection |
65068 | 0 | Centreline |
65069 | 0 | Text |
65070 | 0 | Text Box |
65071 | 0 | Motion input (x) |
65072 | 0 | Nodal move |
65073 | 0 | Move Label |
65074 | 0 | Element deletion |
65075 | 0 | Show element properties |
65076 | 0 | Element and Graphics selection |
65077 | 0 | Select Graphics |
65078 | 0 | Ungroup |
65079 | 0 | Edit node properties |
65080 | 0 | Rotate mechanism and/or graphics |
65081 | 0 | Translate mechanism and/or graphics |
65082 | 0 | Scale mechanism and/or graphics |
65083 | 0 | Mirror horizontal |
65084 | 0 | Mirror vertical |
65085 | 0 | Set new initial position of mechanism |
65086 | 0 | Ungroup |
65087 | 0 | Translate a group |
65088 | 0 | Belt |
65089 | 0 | Sensor |
65090 | 0 | Rotation Sensor |
65091 | 0 | Spring |
65092 | 0 | Gas Spring |
65093 | 0 | Non-linear Spring |
65094 | 0 | Damper |
65095 | 0 | Friction |
65096 | 0 | Rotation Spring |
65097 | 0 | Rotation Damper |
65098 | 0 | Rotation Friction |
65099 | 0 | Motor |
65100 | 0 | Node fixation |
65101 | 0 | Angle fixation (abs) |
65102 | 0 | Angle fixation (rel) |
65103 | 0 | Unfix |
65104 | 0 | Failed to retrieve tab at index %d |
65105 | 0 | Failed to get object at index %d |
65106 | 0 | Failed to set tab "%s" at index %d |
65107 | 0 | Failed to set object at index %d |
65108 | 0 | MultiLine must be True when TabPosition is tpLeft or tpRight |
65109 | 0 | RichEdit line insertion error |
65110 | 0 | Failed to Load Stream |
65111 | 0 | Failed to Save Stream |
65112 | 0 | %d is an invalid PageIndex value. PageIndex must be between 0 and %d |
65113 | 0 | Print |
65114 | 0 | Create Project Documentation |
65115 | 0 | Beam |
65116 | 0 | Slider |
65117 | 0 | Curved Slider |
65118 | 0 | Gear |
65119 | 0 | Rack-Pinion |
65120 | 0 | Class '%s' is already registered for '%s' |
65121 | 0 | Class '%s' is not registered for '%s' |
65122 | 0 | %s parameter cannot be nil |
65123 | 0 | A StyleHook class has not been registered for %s |
65124 | 0 | Feature not supported by this style |
65125 | 0 | Style '%s' is not registered |
65126 | 0 | Cannot unregister the system style |
65127 | 0 | Style not registered |
65128 | 0 | Cannot call BeginInvoke on a control with no parent or window handle |
65129 | 0 | OLE error %.8x |
65130 | 0 | Method '%s' not supported by automation object |
65131 | 0 | Variant does not reference an automation object |
65132 | 0 | Dispatch methods do not support more than 64 parameters |
65133 | 0 | DCOM not installed |
65134 | 0 | Failed to clear tab control |
65135 | 0 | Failed to delete tab at index %d |
65136 | 0 | UTF-7 |
65137 | 0 | Cannot remove shell notification icon |
65138 | 0 | PageControl must first be assigned |
65139 | 0 | %s requires Windows Vista or later |
65140 | 0 | Button%d |
65141 | 0 | RadioButton%d |
65142 | 0 | Caption cannot be empty |
65143 | 0 | Unable to load style '%s' |
65144 | 0 | Unable to load styles: %s |
65145 | 0 | Style '%s' already registered |
65146 | 0 | Style class '%s' already registered |
65147 | 0 | Style '%s' not found |
65148 | 0 | Style class '%s' not found |
65149 | 0 | Invalid style handle |
65150 | 0 | Invalid style format |
65151 | 0 | VCL Style File |
65152 | 0 | - Dock zone has no control |
65153 | 0 | Error loading dock zone from the stream. Expecting version %d, but found %d. |
65154 | 0 | Length of value array must be >= length of prompt array |
65155 | 0 | Prompt array must not be empty |
65156 | 0 | &Username |
65157 | 0 | &Password |
65158 | 0 | &Domain |
65159 | 0 | Login |
65160 | 0 | Separator |
65161 | 0 | Error setting %s.Count |
65162 | 0 | Listbox (%s) style must be virtual in order to set Count |
65163 | 0 | ANSI |
65164 | 0 | ASCII |
65165 | 0 | Unicode |
65166 | 0 | Big Endian Unicode |
65167 | 0 | UTF-8 |
65168 | 0 | Shift+ |
65169 | 0 | Ctrl+ |
65170 | 0 | Alt+ |
65171 | 0 | Value must be between %d and %d |
65172 | 0 | All |
65173 | 0 | Unable to insert a line |
65174 | 0 | Invalid clipboard format |
65175 | 0 | Clipboard does not support Icons |
65176 | 0 | Cannot open clipboard: %s |
65177 | 0 | Text exceeds memo capacity |
65178 | 0 | Operation not supported on selected printer |
65179 | 0 | There is no default printer currently selected |
65180 | 0 | Menu '%s' is already being used by another form |
65181 | 0 | Docked control must have a name |
65182 | 0 | Error removing control from dock tree |
65183 | 0 | - Dock zone not found |
65184 | 0 | &Close |
65185 | 0 | BkSp |
65186 | 0 | Tab |
65187 | 0 | Esc |
65188 | 0 | Enter |
65189 | 0 | Space |
65190 | 0 | PgUp |
65191 | 0 | PgDn |
65192 | 0 | End |
65193 | 0 | Home |
65194 | 0 | Left |
65195 | 0 | Up |
65196 | 0 | Right |
65197 | 0 | Down |
65198 | 0 | Ins |
65199 | 0 | Del |
65200 | 0 | Invalid input value. Use escape key to abandon changes |
65201 | 0 | Warning |
65202 | 0 | Error |
65203 | 0 | Information |
65204 | 0 | Confirm |
65205 | 0 | &Yes |
65206 | 0 | &No |
65207 | 0 | OK |
65208 | 0 | Cancel |
65209 | 0 | &Help |
65210 | 0 | &Abort |
65211 | 0 | &Retry |
65212 | 0 | &Ignore |
65213 | 0 | &All |
65214 | 0 | N&o to All |
65215 | 0 | Yes to &All |
65216 | 0 | &Retry |
65217 | 0 | Abort |
65218 | 0 | &All |
65219 | 0 | Cannot drag a form |
65220 | 0 | Metafiles |
65221 | 0 | Enhanced Metafiles |
65222 | 0 | Icons |
65223 | 0 | Bitmaps |
65224 | 0 | TIFF Images |
65225 | 0 | Grid too large for operation |
65226 | 0 | Too many rows or columns deleted |
65227 | 0 | Grid index out of range |
65228 | 0 | Fixed column count must be less than column count |
65229 | 0 | Fixed row count must be less than row count |
65230 | 0 | Cannot insert or delete rows from grid |
65231 | 0 | Invalid input value |
65232 | 0 | Printer is not currently printing |
65233 | 0 | Printing in progress |
65234 | 0 | Printer index out of range |
65235 | 0 | Printer selected is not valid |
65236 | 0 | %s on %s |
65237 | 0 | GroupIndex cannot be less than a previous menu item's GroupIndex |
65238 | 0 | Cannot create form. No MDI forms are currently active |
65239 | 0 | Can only modify an image if it contains a bitmap |
65240 | 0 | A control cannot have itself as its parent |
65241 | 0 | OK |
65242 | 0 | Cancel |
65243 | 0 | &Yes |
65244 | 0 | &No |
65245 | 0 | &Help |
65246 | 0 | &Close |
65247 | 0 | &Ignore |
65248 | 0 | Failed to write ImageList data to stream |
65249 | 0 | Error creating window device context |
65250 | 0 | Error creating window class |
65251 | 0 | Cannot focus a disabled or invisible window |
65252 | 0 | Control '%s' has no parent window |
65253 | 0 | . Path:
%s |
65254 | 0 | Parent given is not a parent of '%s' |
65255 | 0 | Cannot hide an MDI Child Form |
65256 | 0 | Cannot change Visible in OnShow or OnHide |
65257 | 0 | Cannot make a visible window modal |
65258 | 0 | Scrollbar property out of range |
65259 | 0 | %s property out of range |
65260 | 0 | Menu index out of range |
65261 | 0 | Menu inserted twice |
65262 | 0 | Sub-menu is not in menu |
65263 | 0 | Not enough timers available |
65264 | 0 | Scan line index out of range |
65265 | 0 | Cannot change the size of an icon |
65266 | 0 | Cannot change the size of a WIC Image |
65267 | 0 | Invalid operation on TOleGraphic |
65268 | 0 | Unknown picture file extension (.%s) |
65269 | 0 | Unsupported clipboard format |
65270 | 0 | Unsupported stream format |
65271 | 0 | Out of system resources |
65272 | 0 | Canvas does not allow drawing |
65273 | 0 | Text format flag '%s' not supported |
65274 | 0 | Invalid image size |
65275 | 0 | Invalid ImageList |
65276 | 0 | Unable to Replace Image |
65277 | 0 | Unable to Insert Image |
65278 | 0 | Invalid ImageList Index |
65279 | 0 | Failed to read ImageList data from stream |
65280 | 0 | The object does not implement the observer interface |
65281 | 0 | No single cast observer with ID %d was added to the observer collection |
65282 | 0 | No multi cast observer with ID %d was added to the observer collection |
65283 | 0 | Observer is not available |
65284 | 0 | Invalid date string: %s |
65285 | 0 | Invalid time string: %s |
65286 | 0 | Invalid time Offset string: %s |
65287 | 0 | Must wait on at least one event |
65288 | 0 | Cannot call BeginInvoke on a TComponent in the process of destruction |
65289 | 0 | Tab position incompatible with current tab style |
65290 | 0 | Tab style incompatible with current tab position |
65291 | 0 | Bitmap image is not valid |
65292 | 0 | Icon image is not valid |
65293 | 0 | Metafile is not valid |
65294 | 0 | Invalid pixel format |
65295 | 0 | Invalid image |
65296 | 0 | Windows Vista |
65297 | 0 | Windows Server 2008 |
65298 | 0 | Windows 7 |
65299 | 0 | Windows Server 2008 R2 |
65300 | 0 | Windows 2000 |
65301 | 0 | Windows XP |
65302 | 0 | Windows Server 2003 |
65303 | 0 | Windows Server 2003 R2 |
65304 | 0 | Windows Server 2012 |
65305 | 0 | Windows Server 2012 R2 |
65306 | 0 | Windows Server 2016 |
65307 | 0 | Windows 8 |
65308 | 0 | Windows 8.1 |
65309 | 0 | Windows 10 |
65310 | 0 | Observer is not supported |
65311 | 0 | Cannot have multiple single cast observers added to the observers collection |
65312 | 0 | No topic-based help system installed |
65313 | 0 | No help found for %s |
65314 | 0 | Argument out of range |
65315 | 0 | Argument must not be nil |
65316 | 0 | Item not found |
65317 | 0 | Duplicates not allowed |
65318 | 0 | Insufficient RTTI available to support this operation |
65319 | 0 | Parameter count mismatch |
65320 | 0 | Type '%s' is not declared in the interface section of a unit |
65321 | 0 | VAR and OUT arguments must match parameter type exactly |
65322 | 0 | Specified Login Credential Service not found |
65323 | 0 | %s (Version %d.%d, Build %d, %5:s) |
65324 | 0 | %s Service Pack %4:d (Version %1:d.%2:d, Build %3:d, %5:s) |
65325 | 0 | 32-bit Edition |
65326 | 0 | 64-bit Edition |
65327 | 0 | Windows |
65328 | 0 | Low surrogate char without a preceding high surrogate char at index: %d. Check that the string is encoded properly |
65329 | 0 | Length of Strings and Objects arrays must be equal |
65330 | 0 | Class %s is not intended to be constructed |
65331 | 0 | Invalid Timeout value: %s |
65332 | 0 | SpinCount out of range. Must be between 0 and %d |
65333 | 0 | Timespan too long |
65334 | 0 | The duration cannot be returned because the absolute value exceeds the value of TTimeSpan.MaxValue |
65335 | 0 | Value cannot be NaN |
65336 | 0 | Negating the minimum value of a Timespan is invalid |
65337 | 0 | Invalid Timespan format |
65338 | 0 | Timespan element too long |
65339 | 0 | No context-sensitive help installed |
65340 | 0 | No help found for context %d |
65341 | 0 | Unable to open Index |
65342 | 0 | Unable to open Search |
65343 | 0 | Unable to find a Table of Contents |
65344 | 0 | Cannot call SetReturnValue on an externally create thread |
65345 | 0 | Parameter %s cannot be nil |
65346 | 0 | Parameter %s cannot be a negative value |
65347 | 0 | Input buffer exceeded for %s = %d, %s = %d |
65348 | 0 | Invalid characters in path |
65349 | 0 | The specified path is too long |
65350 | 0 | The specified path was not found |
65351 | 0 | The path format is not supported |
65352 | 0 | The drive cannot be found |
65353 | 0 | The specified file was not found |
65354 | 0 | No help viewer that supports filters |
65355 | 0 | Invalid argument |
65356 | 0 | Index out of range (%d). Must be >= 0 and < %d |
65357 | 0 | String index out of range (%d). Must be >= %d and <= %d |
65358 | 0 | Invalid UTF32 character value. Must be >= 0 and <= $10FFFF, excluding surrogate pair ranges |
65359 | 0 | High surrogate char without a following low surrogate char at index: %d. Check that the string is encoded properly |
65360 | 0 | Failed to get data for '%s' |
65361 | 0 | Failed to set data for '%s' |
65362 | 0 | Resource %s not found |
65363 | 0 | %s.Seek not implemented |
65364 | 0 | Operation not allowed on sorted list |
65365 | 0 | String expected |
65366 | 0 | %s expected |
65367 | 0 | %s not in a class registration group |
65368 | 0 | Property %s does not exist |
65369 | 0 | Stream write error |
65370 | 0 | Thread creation error: %s |
65371 | 0 | Thread Error: %s (%d) |
65372 | 0 | Cannot terminate an externally created thread |
65373 | 0 | Cannot wait for an externally created thread |
65374 | 0 | Cannot call Start on a running or suspended thread |
65375 | 0 | Cannot call CheckTerminated on an externally created thread |
65376 | 0 | Invalid property value |
65377 | 0 | Invalid data type for '%s' |
65378 | 0 | Invalid string constant |
65379 | 0 | Line too long |
65380 | 0 | List capacity out of bounds (%d) |
65381 | 0 | List count out of bounds (%d) |
65382 | 0 | List index out of bounds (%d) |
65383 | 0 | Out of memory while expanding memory stream |
65384 | 0 | %s has not been registered as a COM class |
65385 | 0 | Number expected |
65386 | 0 | ANSI or UTF8 encoding expected |
65387 | 0 | %s on line %d |
65388 | 0 | Error reading %s%s%s: %s |
65389 | 0 | Stream read error |
65390 | 0 | Property is read-only |
65391 | 0 | Failed to create key %s |
65392 | 0 | ''%s'' expected |
65393 | 0 | CheckSynchronize called from thread $%x, which is NOT the main thread |
65394 | 0 | Class %s not found |
65395 | 0 | A class named %s already exists |
65396 | 0 | List does not allow duplicates ($0%x) |
65397 | 0 | A component named %s already exists |
65398 | 0 | String list does not allow duplicates |
65399 | 0 | Cannot create file "%s". %s |
65400 | 0 | Cannot open file "%s". %s |
65401 | 0 | Identifier expected |
65402 | 0 | Unable to write to %s |
65403 | 0 | Invalid binary value |
65404 | 0 | Invalid stream format |
65405 | 0 | ''%s'' is not a valid component name |
65406 | 0 | Invalid property value |
65407 | 0 | Invalid property path |
65408 | 0 | Saturday |
65409 | 0 | Unable to create directory |
65410 | 0 | Invalid source array |
65411 | 0 | Invalid destination array |
65412 | 0 | Character index out of bounds (%d) |
65413 | 0 | Start index out of bounds (%d) |
65414 | 0 | Invalid count (%d) |
65415 | 0 | Invalid destination index (%d) |
65416 | 0 | Invalid code page |
65417 | 0 | Invalid encoding name |
65418 | 0 | No mapping for the Unicode character exists in the target multi-byte code page |
65419 | 0 | Invalid StringBaseIndex |
65420 | 0 | Ancestor for '%s' not found |
65421 | 0 | Cannot assign a %s to a %s |
65422 | 0 | Bits index out of range |
65423 | 0 | Can't write to a read-only resource stream |
65424 | 0 | October |
65425 | 0 | November |
65426 | 0 | December |
65427 | 0 | Sun |
65428 | 0 | Mon |
65429 | 0 | Tue |
65430 | 0 | Wed |
65431 | 0 | Thu |
65432 | 0 | Fri |
65433 | 0 | Sat |
65434 | 0 | Sunday |
65435 | 0 | Monday |
65436 | 0 | Tuesday |
65437 | 0 | Wednesday |
65438 | 0 | Thursday |
65439 | 0 | Friday |
65440 | 0 | Jun |
65441 | 0 | Jul |
65442 | 0 | Aug |
65443 | 0 | Sep |
65444 | 0 | Oct |
65445 | 0 | Nov |
65446 | 0 | Dec |
65447 | 0 | January |
65448 | 0 | February |
65449 | 0 | March |
65450 | 0 | April |
65451 | 0 | May |
65452 | 0 | June |
65453 | 0 | July |
65454 | 0 | August |
65455 | 0 | September |
65456 | 0 | Interface not supported |
65457 | 0 | Exception in safecall method |
65458 | 0 | Object lock not owned |
65459 | 0 | Monitor support function not initialized |
65460 | 0 | Feature not implemented |
65461 | 0 | Method called on disposed object |
65462 | 0 | %s (%s, line %d) |
65463 | 0 | Abstract Error |
65464 | 0 | Access violation at address %p in module '%s'. %s of address %p |
65465 | 0 | System Error. Code: %d.
%s%s |
65466 | 0 | A call to an OS function failed |
65467 | 0 | Jan |
65468 | 0 | Feb |
65469 | 0 | Mar |
65470 | 0 | Apr |
65471 | 0 | May |
65472 | 0 | Invalid variant operation |
65473 | 0 | Invalid NULL variant operation |
65474 | 0 | Invalid variant operation (%s%.8x)
%s |
65475 | 0 | Custom variant type (%s%.4x) is out of range |
65476 | 0 | Custom variant type (%s%.4x) already used by %s |
65477 | 0 | Custom variant type (%s%.4x) is not usable |
65478 | 0 | Too many custom variant types have been registered |
65479 | 0 | Could not convert variant of type (%s) into type (%s) |
65480 | 0 | Overflow while converting variant of type (%s) into type (%s) |
65481 | 0 | Variant overflow |
65482 | 0 | Invalid argument |
65483 | 0 | Invalid variant type |
65484 | 0 | Operation not supported |
65485 | 0 | Unexpected variant error |
65486 | 0 | External exception %x |
65487 | 0 | Assertion failed |
65488 | 0 | Privileged instruction |
65489 | 0 | Operation aborted |
65490 | 0 | Exception %s in module %s at %p.
%s%s
|
65491 | 0 | Application Error |
65492 | 0 | Format '%s' invalid or incompatible with argument |
65493 | 0 | No argument for format '%s' |
65494 | 0 | Variant method calls not supported |
65495 | 0 | Read |
65496 | 0 | Write |
65497 | 0 | Execution |
65498 | 0 | Invalid access |
65499 | 0 | Format string too long |
65500 | 0 | Error creating variant or safe array |
65501 | 0 | Variant or safe array index out of bounds |
65502 | 0 | Variant or safe array is locked |
65503 | 0 | Invalid variant type conversion |
65504 | 0 | Read beyond end of file |
65505 | 0 | Disk full |
65506 | 0 | Invalid numeric input |
65507 | 0 | Division by zero |
65508 | 0 | Range check error |
65509 | 0 | Integer overflow |
65510 | 0 | Invalid floating point operation |
65511 | 0 | Floating point division by zero |
65512 | 0 | Floating point overflow |
65513 | 0 | Floating point underflow |
65514 | 0 | Invalid pointer operation |
65515 | 0 | Invalid class typecast |
65516 | 0 | Access violation at address %p. %s of address %p |
65517 | 0 | Access violation |
65518 | 0 | Stack overflow |
65519 | 0 | Control-C hit |
65520 | 0 | <unknown> |
65521 | 0 | '%s' is not a valid integer value |
65522 | 0 | '%s' is not a valid floating point value |
65523 | 0 | '%s' is not a valid date |
65524 | 0 | '%s' is not a valid time |
65525 | 0 | '%s' is not a valid date and time |
65526 | 0 | '%d.%d' is not a valid timestamp |
65527 | 0 | '%s' is not a valid GUID value |
65528 | 0 | Invalid argument to time encode |
65529 | 0 | Invalid argument to date encode |
65530 | 0 | Out of memory |
65531 | 0 | I/O error %d |
65532 | 0 | File not found |
65533 | 0 | Invalid filename |
65534 | 0 | Too many open files |
65535 | 0 | File access denied |