id | lang | string |
---|
1 | 1029 | The server's host key was not found in the cache. You have no guarantee that the server is the computer you think it is.
The server's %s key fingerprint is:
%s
If you trust this host, press Yes. To connect without adding host key to the cache, press No. To abandon the connection press Cancel.
Continue connecting and add host key to the cache? |
2 | 1029 | WARNING - POTENTIAL SECURITY BREACH!
The server's host key does not match the one WinSCP has in cache. This means that either the server administrator has changed the host key, the server presents different key under certain circumstance, or you have actually connected to another computer pretending to be the server.
The new %s key fingerprint is:
%s
If you were expecting this change, trust the new key and want to continue connecting, either press Update to update cache, or press Add to add the new key to the cache while keeping the old one(s). If you want to carry on connecting but without updating the cache, press Skip. If you want to abandon the connection completely, press Cancel. Pressing Cancel is the ONLY guaranteed safe choice. |
3 | 1029 | You are loading an SSH-2 private key which has an old version of the file format. This means your key file is not fully tamperproof. We recommend you convert your key to the new format.
You can perform this conversion by loading the key into PuTTYgen and then saving it again. |
4 | 1029 | help [ <command> [ <command2> ... ] ]
Displays list of commands when no parameters are specified.
Displays help for each command when some are specified.
alias:
man
examples:
help
help ls |
5 | 1029 | exit
Closes all sessions and terminates the program.
alias:
bye |
6 | 1029 | open <stored session>
open [ sftp|scp|ftp:// ][ <user> [ :password ] @ ] <host> [ :<port> ]
Establishes connection to given host. Use either name of the stored
session or specify host, username, port and protocol directly.
switches:
-privatekey=<key> Private key file
-timeout=<sec> Server response timeout
-hostkey=<fingerprint> Fingerprint of server hostkey (SFTP and SCP only).
-certificate=<fingerprint> Fingerprint of SSL/TLS certificate (FTPS only)
-passive=on|off Passive mode (FTP protocol only)
-implicit Implicit TLS/SSL (FTPS protocol only)
-explicitssl Explicit SSL (FTPS protocol only)
-explicittls Explicit TLS (FTPS protocol only)
-rawsettings setting1=value1 setting2=value2 ...
Configures any session settings using raw format
as in an INI file
examples:
open
open sftp://martin@example.com:2222 -privatekey=mykey.ppk
open martin@example.com
open example.com |
7 | 1029 | close [ <session> ]
Closes session specified by its number. When session number is not
specified, closes currently selected session.
examples:
close
close 1 |
8 | 1029 | session [ <session> ]
Makes session specified by its number active. When session number
is not specified, lists connected sessions.
examples:
session
session 1 |
9 | 1029 | pwd
Prints current remote working directory for active session. |
10 | 1029 | cd [ <directory> ]
Changes remote working directory for active session.
If directory is not specified, changes to home directory.
examples:
cd /home/martin
cd |
11 | 1029 | ls [ <directory> ]/[ <wildcard> ]
Lists the contents of specified remote directory. If directory is
not specified, lists working directory.
When wildcard is specified, it is treated as set of files to list.
Otherwise, all files are listed.
alias:
dir
examples:
ls
ls *.html
ls /home/martin |
12 | 1029 | lpwd
Prints current local working directory (valid for all sessions). |
13 | 1029 | lcd <directory>
Changes local working directory for all sessions.
example:
lcd d:\ |
14 | 1029 | lls [ <directory> ]\[ <wildcard> ]
Lists the contents of specified local directory. If directory is
not specified, lists working directory.
When wildcard is specified, it is treated as set of files to list.
Otherwise, all files are listed.
examples:
lls
lls *.html
lls d:\ |
15 | 1029 | rm <file> [ <file2> ... ]
Removes one or more remote files. If remote recycle bin is
configured, moves file to the bin instead of deleting it.
Filename can be replaced with wildcard to select multiple files.
examples:
rm index.html
rm index.html about.html
rm *.html |
16 | 1029 | rmdir <directory> [ <directory2> ... ]
Removes one or more remote directories. If remote recycle bin is
configured, moves directory to the bin instead of deleting it.
example:
rmdir public_html |
17 | 1029 | mv <file> [ <file2> ... ] [ <directory>/ ][ <newname> ]
Moves or renames one or more remote files. Destination directory or new
name or both must be specified. Destination directory must end with
slash. Operation mask can be used instead of new name.
Filename can be replaced with wildcard to select multiple files.
alias:
rename
examples:
mv index.html public_html/
mv index.html about.*
mv index.html public_html/about.*
mv public_html/index.html public_html/about.html /home/martin/*.bak
mv *.html /home/backup/*.bak |
18 | 1029 | chmod <mode> <file> [ <file2> ... ]
Changes permissions of one or more remote files. Mode can be specified
as three or four-digit octal number.
Filename can be replaced with wildcard to select multiple files.
examples:
chmod 644 index.html about.html
chmod 1700 /home/martin/public_html
chmod 644 *.html |
19 | 1029 | ln <target> <symlink>
Creates remote symlink.
alias:
symlink
example:
ln /home/martin/public_html www |
20 | 1029 | mkdir <directory>
Creates remote directory.
example:
mkdir public_html |
21 | 1029 | get <file> [ [ <file2> ... ] <directory>\[ <newname> ] ]
Downloads one or more files from remote directory to local directory.
If only one parameter is specified downloads the file to local working
directory. If more parameters are specified, all except the last one
specify set of files to download. The last parameter specifies target
local directory and optionally operation mask to store file(s) under
different name. Destination directory must end with backslash.
Filename can be replaced with wildcard to select multiple files.
To download more files to current working directory use '.\' as the
last parameter.
alias:
recv, mget
switches:
-delete Delete source remote file(s) after transfer
-resume Resume transfer if possible (SFTP and FTP protocols only)
-append Append file to end of target file (SFTP protocol only)
-preservetime Preserve timestamp
-nopreservetime Do not preserve timestamp
-speed=<kibps> Limit transfer speed
-transfer=<mode> Transfer mode: binary, ascii, automatic
-filemask=<mask> Sets file mask.
effective options:
confirm, reconnecttime
examples:
get index.html
get -delete index.html about.html .\
get index.html about.html d:\www\
get public_html/index.html d:\www\about.*
get *.html *.png d:\www\*.bak |
22 | 1029 | put <file> [ [ <file2> ... ] <directory>/[ <newname> ] ]
Uploads one or more files from local directory to remote directory.
If only one parameter is specified uploads the file to remote working
directory. If more parameters are specified, all except the last one
specify set of files to upload. The last parameter specifies target
remote directory and optionally operation mask to store file(s) under
different name. Destination directory must end with slash.
Filename can be replaced with wildcard to select multiple files.
To upload more files to current working directory use './' as the
last parameter.
alias:
send, mput
switches:
-delete Delete source local file(s) after transfer
-resume Resume transfer if possible (SFTP and FTP protocols only)
-append Append file to end of target file (SFTP protocol only)
-preservetime Preserve timestamp
-nopreservetime Do not preserve timestamp
-permissions=<mode> Set permissions
-nopermissions Keep default permissions
-speed=<kibps> Limit transfer speed
-transfer=<mode> Transfer mode: binary, ascii, automatic
-filemask=<mask> Sets file mask.
effective options:
confirm, reconnecttime
examples:
put index.html
put -delete index.html about.html ./
put -permissions=644 index.html about.html /home/martin/public_html/
put d:\www\index.html about.*
put *.html *.png /home/martin/backup/*.bak |
23 | 1029 | option [ <option> [ <value> ] ]
If no parameters are specified, lists all script options and their
values. When one parameter is specified only, shows value of the option.
When two parameters are specified sets value of the option.
Initial values of some options are taken from application configuration,
however modifing the options does not change the application
configuration.
options are:
echo on|off
Toggles echoing of command being executed.
Commands affected: all
batch on|off|abort|continue
Toggles batch mode (all prompts are automatically replied
negatively). When 'on', it is recommended to set 'confirm'
to 'off' to allow overwrites. With 'abort', script is aborted
when any error occurs. With 'continue', all errors are ignored.
Commands affected: nearly all
confirm on|off
Toggles confirmations (overwrite, etc.).
Commands affected: get, put
reconnecttime off | <sec>
Time limit in seconds to try reconnecting broken sessions.
Commands affected: get, put, synchronize, keepuptodate
examples:
option
option batch
option confirm off |
24 | 1029 | synchronize local|remote|both [ <local directory> [ <remote directory> ] ]
When the first parameter is 'local' synchronises local directory with
remote one. When the first parameter is 'remote' synchronises remote
directory with local one. When the first parameter is 'both' synchronises
directories one against the other.
When directories are not specified, current working directories are
synchronized.
Note: Overwrite confirmations are always off for the command.
switches:
-delete Delete obsolete files
-mirror Mirror mode (synchronize also older files).
Ignored for 'both'.
-criteria=<criteria> Comparison criteria. Possible values are 'none', 'time',
'size' and 'either'. Ignored for 'both' mode.
-permissions=<mode> Set permissions
-nopermissions Keep default permissions
-speed=<kibps> Limit transfer speed
-transfer=<mode> Transfer mode: binary, ascii, automatic
-filemask=<mask> Sets file mask.
effective options:
reconnecttime
examples:
synchronize remote -delete
synchronize both d:\www /home/martin/public_html |
25 | 1029 | keepuptodate [ <local directory> [ <remote directory> ] ]
Watches for changes in local directory and reflects them on remote one.
When directories are not specified, current working directories are
synchronized. To stop watching for changes press Ctrl-C.
Note: Overwrite confirmations are always off for the command.
switches:
-delete Delete obsolete files
-permissions=<mode> Set permissions
-nopermissions Keep default permissions
-speed=<kibps> Limit transfer speed
-transfer=<mode> Transfer mode: binary, ascii, automatic
-filemask=<mask> Sets file mask.
effective options:
reconnecttime
examples:
keepuptodate -delete
keepuptodate d:\www /home/martin/public_html |
26 | 1029 | call <command>
With SFTP and SCP protocols, executes arbitrary remote shell command.
If current session does not allow execution of arbitrary remote command
separate shell session will be automatically opened.
With FTP protocol, executes a protocol command.
The command must not require user input.
alias:
!
example:
call touch index.html |
27 | 1029 | echo <message>
Prints message onto script output.
example:
echo Starting upload... |
28 | 1029 | stat <file>
Retrieves and lists attributes of specified remote file.
examples:
stat index.html |
100 | 1029 | CORE_ERROR |
101 | 1029 | Host key wasn't verified! |
102 | 1029 | Connection failed. |
103 | 1029 | Terminated by user. |
104 | 1029 | Lost connection. |
105 | 1029 | Can't detect command return code. |
106 | 1029 | Command '%s'
failed with return code %d and error message
%s. |
107 | 1029 | Command failed with return code %d. |
108 | 1029 | Command '%s' failed with invalid output '%s'. |
109 | 1029 | Error getting name of current remote directory. |
110 | 1029 | Error skipping startup message. Your shell is probably incompatible with the application (BASH is recommended). |
111 | 1029 | Error changing directory to '%s'. |
113 | 1029 | Error listing directory '%s'. |
114 | 1029 | Unexpected directory listing line '%s'. |
115 | 1029 | Invalid rights description '%s' |
116 | 1029 | Error cleaning up general configuration. |
117 | 1029 | Error cleaning up stored sessions. |
118 | 1029 | Error cleaning up random seed file. |
119 | 1029 | Error cleaning up cached host keys. |
120 | 1029 | Error detecting variable containing return code of last command. |
121 | 1029 | Error looking up user groups. |
122 | 1029 | File or folder '%s' does not exist. |
123 | 1029 | Can't get attributes of file '%s'. |
124 | 1029 | Can't open file '%s'. |
125 | 1029 | Error reading file '%s'. |
126 | 1029 | Copying file '%s' fatally failed. |
127 | 1029 | Copying files to remote side failed. |
128 | 1029 | Copying files from remote side failed. |
129 | 1029 | SCP protocol error: Unexpected newline |
130 | 1029 | SCP protocol error: Illegal time format |
131 | 1029 | SCP protocol error: Invalid control record (%s; %s) |
132 | 1029 | Copying file '%s' failed. |
133 | 1029 | SCP protocol error: Illegal file descriptor format |
134 | 1029 | '%s' is not folder! |
135 | 1029 | Error creating folder '%s'. |
136 | 1029 | Can't create file '%s'. |
137 | 1029 | Error writting to file '%s' |
138 | 1029 | Can't set attributes of file '%s'. |
139 | 1029 | Received error message from remote side: '%s' |
140 | 1029 | Error deleting file '%s'. |
141 | 1029 | Error occured during logging. It's been turned off. |
142 | 1029 | Can't open log file '%s'. |
143 | 1029 | Error renaming file '%s' to '%s'. |
144 | 1029 | File with name '%s' already exists. |
145 | 1029 | Directory with name '%s' already exists. |
146 | 1029 | Error changing directory to home directory. |
147 | 1029 | Error clearing all aliases. |
149 | 1029 | Error clearing national user variables. |
150 | 1029 | Unexpected input from server: %s |
151 | 1029 | Error cleaning up INI file. |
153 | 1029 | Authentication log (see session log for details):
%s |
154 | 1029 | Authentication failed. |
155 | 1029 | Connection has been unexpectedly closed. |
156 | 1029 | Error saving key to file '%s'. |
158 | 1029 | Server sent command exit status %d. |
159 | 1029 | SFTP protocol violation: Invalid response message type (%d). |
160 | 1029 | Version of SFTP server (%d) is not supported. Supported versions are %d to %d. |
161 | 1029 | SFTP protocol violation: Invalid message number %d (expected %d). |
162 | 1029 | Unexpected OK response. |
163 | 1029 | Unexpected EOF response. |
164 | 1029 | No such file or directory. |
165 | 1029 | Permission denied. |
166 | 1029 | General failure (server should provide error description). |
167 | 1029 | Bad message (badly formatted packet or protocol incompatibility). |
168 | 1029 | No connection. |
169 | 1029 | Connection lost. |
170 | 1029 | The server does not support the operation. |
171 | 1029 | %s
Error code: %d
Error message from server%s: %s
Request code: %d |
172 | 1029 | Unknown status code. |
173 | 1029 | Error reading symlink '%s'. |
174 | 1029 | Server returned empty listing for directory '%s'. |
175 | 1029 | Received SSH_FXP_NAME packet with zero or multiple records. |
176 | 1029 | Cannot get real path for '%s'. |
177 | 1029 | Cannot change properties of file '%s'. |
178 | 1029 | Cannot initialize SFTP protocol. Is the host running a SFTP server? |
179 | 1029 | Cannot read timezone information |
180 | 1029 | Cannot create remote file '%s'. |
181 | 1029 | Cannot open remote file '%s'. |
182 | 1029 | Cannot close remote file '%s'. |
183 | 1029 | '%s' is not file! |
184 | 1029 | Transfer was successfully finished, but temporary transfer file '%s' could not be renamed to target file name '%s'. If the problem persists, you may try to turn off transfer resume support. |
185 | 1029 | Cannot create link '%s'. |
186 | 1029 | Invalid command '%s'. |
187 | 1029 | None |
188 | 1029 | '%s' is not valid permission in octal format. |
189 | 1029 | Server requires unsupported end-of-line sequence (%s). |
190 | 1029 | Unknown file type (%d) |
191 | 1029 | Invalid handle. |
192 | 1029 | The file path does not exist or is invalid. |
193 | 1029 | File already exists. |
194 | 1029 | The file is on read-only media, or the media is write protected. |
195 | 1029 | There is no media available in the drive. |
196 | 1029 | Error decoding UTF-8 string. |
197 | 1029 | Error executing custom command '%s' on file '%s'. |
198 | 1029 | Cannot load locale %d. |
199 | 1029 | Received incomplete data packet before end of file. |
200 | 1029 | Error calculating size of directory '%s'. |
201 | 1029 | Received too large (%d B) SFTP packet. Max supported packet size is %d B. |
202 | 1029 | Cannot execute SCP to start transfer. Please make sure that SCP is installed on the server and path to it is included in PATH. You may also try SFTP instead of SCP. |
203 | 1029 | Location Profile with name '%s' already exists. |
204 | 1029 | Error moving file '%s' to '%s'. |
205 | 1029 | %s
The error is typically caused by message printed from startup script (like .profile). The message may start with "%s". |
206 | 1029 | Upload of file '%s' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on 'Ignore permission errors' option. |
207 | 1029 | Invalid access to memory |
208 | 1029 | There is no free space on the filesystem. |
209 | 1029 | Operation cannot be completed because it would exceed the users storage quota. |
210 | 1029 | Principal (%s) is unknown to the server. |
211 | 1029 | Error copying file '%s' to '%s'. |
212 | 1029 | Unterminated pattern '%s' starting at %d. |
213 | 1029 | Unknown pattern '%s' starting at %d. |
214 | 1029 | Cannot combine file name pattern (starting at %d) with file list pattern (starting at %d). |
215 | 1029 | Unknown command '%s'. |
216 | 1029 | Ambiguous command '%s'. Possible matches are: %s |
217 | 1029 | Missing parameter for command '%s'. |
218 | 1029 | Too many parameters for command '%s'. |
219 | 1029 | Session named '%s' doesn't exist. |
223 | 1029 | No session. |
224 | 1029 | Invalid session number '%s'. |
225 | 1029 | Unknown option '%s'. |
226 | 1029 | Unknown value '%s' of option '%s'. |
227 | 1029 | Cannot determine status of socket (%d). |
228 | 1029 | Error deleting file '%s'. After resumable file upload the existing destination file must be deleted. If you do not have permissions to delete file destination file, you need to disable resumable file transfers. |
229 | 1029 | Error decoding SFTP packet (%d, %d, %d). |
230 | 1029 | Invalid name '%s'. Name cannot contain '%s'. |
231 | 1029 | The file could not be opened because it is locked by another process. |
232 | 1029 | The directory is not empty. |
233 | 1029 | The specified file is not a directory. |
234 | 1029 | The filename is not valid. |
235 | 1029 | Too many symbolic links encountered. |
236 | 1029 | The file cannot be deleted. |
237 | 1029 | One of the parameters was out of range, or the parameters specified cannot be used together. |
238 | 1029 | The specifed file was a directory in a context where a directory cannot be used. |
239 | 1029 | Byte range lock conflict. |
240 | 1029 | Byte range lock refused. |
241 | 1029 | An operation was attempted on a file for which a delete operation is pending. |
242 | 1029 | The file is corrupt; an filesystem integrity check should be run. |
243 | 1029 | File '%s' does not exist or it does not contain private key in known format. |
244 | 1029 | Private key file '%s' contains key in %s format. WinSCP supports only PuTTY format.
You can use PuTTYgen tool to convert your private key file. |
245 | 1029 | Private key file '%s' contains key in %s format. It does not follow your preferred SSH protocol version. |
246 | 1029 | Cannot overwrite remote file '%s'.
Press 'Delete' to delete the file and create new one instead of overwriting it. |
247 | 1029 | &Delete |
248 | 1029 | Error checking space available for path '%s'. |
249 | 1029 | Cannot find free local listening port number for tunnel in range %d to %d. |
250 | 1029 | Cannot setup network event (error %d). |
251 | 1029 | Server unexpectedly closed network connection. |
252 | 1029 | Error while tunneling the connection.
%s |
253 | 1029 | Error calculating checksum for file '%s'. |
254 | 1029 | Internal error %s (%s). |
255 | 1029 | Operation not supported. |
256 | 1029 | Access denied. |
257 | 1029 | Prompting for credentials... |
258 | 1029 | Invalid response to PWD command '%s'. |
259 | 1029 | This version does not support FTP protocol. |
260 | 1029 | Unknown switch '%s'. |
261 | 1029 | Error transferring file '%s'. |
262 | 1029 | Cannot execute '%s'. |
263 | 1029 | File '%s' not found. |
264 | 1029 | Error waiting for document to close. |
265 | 1029 | '%s' is not a valid speed limit. |
272 | 1029 | Self signed certificate. |
273 | 1029 | Format error in certificate's valid until field. |
274 | 1029 | Format error in certificate's valid from field. |
275 | 1029 | Invalid CA certificate. |
276 | 1029 | Unsupported certificate purpose. |
277 | 1029 | Key usage does not include certificate signing. |
278 | 1029 | Path length constraint exceeded. |
279 | 1029 | Self signed certificate in certificate chain. |
280 | 1029 | Unable to decode issuer public key. |
281 | 1029 | Unable to decrypt certificate signature. |
282 | 1029 | Unable to get issuer certificate. |
283 | 1029 | Unable to get local issuer certificate. |
284 | 1029 | Unable to verify the first certificate. |
285 | 1029 | Unknown certificate verification error. |
286 | 1029 | The error occured at a depth of %d in the certificate chain. |
287 | 1029 | The certificate seems to be valid. |
288 | 1029 | Mask is invalid near '%s'. |
289 | 1029 | The server cannot open connection in active mode. If you are behind a NAT router, you may need to specify an external IP address. Alternatively, consider switching to passive mode. |
290 | 1029 | Error deleting file '%s'. |
291 | 1029 | Invalid switch value '%s'. Valid values are 'on' and 'off'. |
292 | 1029 | Access without password denied. |
299 | 1029 | Error decoding TLS/SSL certificate (%s). |
300 | 1029 | CORE_CONFIRMATION |
301 | 1029 | Host is not communicating for %d seconds.
Wait for another %0:d seconds? |
303 | 1029 | &Passphrase for key '%s': |
304 | 1029 | File '%s' already exists. Overwrite? |
305 | 1029 | Directory '%s' already exists. Overwrite? |
306 | 1029 | The first %scipher supported by the server is %s, which is below the configured warning threshold.
Do you want to continue with this connection? |
308 | 1029 | client-to-server |
309 | 1029 | server-to-client |
310 | 1029 | Target directory contains partially transfered file '%s'. Do you want to resume file transfer? Note: Answering 'No' would delete partially transfered file and restart transfer. |
311 | 1029 | Target directory contains partially transfered file '%s', which is bigger than a source file. The file will be deleted. |
312 | 1029 | Do you want to append file '%s' at the end of existing file? Press 'No' to resume file transfer instead. |
313 | 1029 | %s
New: %s bytes, %s
Existing: %s bytes, %s |
314 | 1029 | File '%s' is read-only. Overwrite? |
315 | 1029 | Local file '%s' already exists. Overwrite? |
316 | 1029 | Remote file '%s' already exists. Overwrite? |
321 | 1029 | Host is not communicating for more than %d seconds. Still waiting...
Note: If the problem repeats, try turning off 'Optimize connection buffer size'. |
322 | 1029 | The first key-exchange algorithm supported by the server is %s, which is below the configured warning threshold.
Do you want to continue with this connection? |
323 | 1029 | &Reconnect |
324 | 1029 | New na&me |
327 | 1029 | Tunnel for %s |
328 | 1029 | Password |
329 | 1029 | Key passphrase |
330 | 1029 | Server prompt |
331 | 1029 | Username |
332 | 1029 | &Username: |
333 | 1029 | Server prompt: %s |
334 | 1029 | New password |
335 | 1029 | &Response: |
336 | 1029 | Using TIS authentication.%s |
337 | 1029 | Using CryptoCard authentication.%s |
338 | 1029 | &Password: |
339 | 1029 | Using keyboard-interactive authentication.%s |
340 | 1029 | &Current password: |
341 | 1029 | &New password: |
342 | 1029 | Confirm new &password: |
343 | 1029 | Tunnel session authentication |
344 | 1029 | Transfer under different name |
345 | 1029 | &New name: |
346 | 1029 | The server's certificate is not known. You have no guarantee that the server is the computer you think it is. Server's certificate details follow:
%s
If you trust this certificate, press Yes. To connect without storing certificate, press No. To abandon the connection press Cancel.
Continue connecting and store the certificate? |
347 | 1029 | - Organization: %s
|- Location: %s
|- Other: %s |
348 | 1029 | %s, %s |
349 | 1029 | Issuer:
%s
Subject:
%s
Valid: %s - %s
Fingerprint (SHA1): %s
Summary: %s |
400 | 1029 | CORE_INFORMATION |
401 | 1029 | Yes |
402 | 1029 | No |
403 | 1029 | Host: %s
User name: %s
Private key file: %s
SSH Protocol version: %s
Transfer protocol: %s |
404 | 1029 | Version %d.%d.%d (Build %d) |
405 | 1029 | Operation was successfully completed. Connection was closed. |
406 | 1029 | SFTP-%d |
407 | 1029 | The version of SFTP protocol does not allow file renaming. |
408 | 1029 | The server does not support any SFTP extension. |
409 | 1029 | The server supports these SFTP extensions: |
412 | 1029 | A&ppend |
413 | 1029 | Ne&wer only |
414 | 1029 | Displays help |
415 | 1029 | Closes all sessions and terminates the program |
416 | 1029 | Connects to server |
417 | 1029 | Closes session |
418 | 1029 | Lists connected sessions or selects active session |
419 | 1029 | Prints remote working directory |
420 | 1029 | Changes remote working directory |
421 | 1029 | Lists the contents of remote directory |
422 | 1029 | Prints local working directory |
423 | 1029 | Changes local working directory |
424 | 1029 | Lists the contents of local directory |
425 | 1029 | Removes remote file |
426 | 1029 | Removes remote directory |
427 | 1029 | Moves or renames remote file |
428 | 1029 | Changes permissions of remote file |
429 | 1029 | Creates remote symbolic link |
430 | 1029 | Creates remote directory |
431 | 1029 | Downloads file from remote directory to local directory |
432 | 1029 | Uploads file from local directory to remote directory |
433 | 1029 | Sets or shows value of script options |
434 | 1029 | Synchronizes remote directory with local one |
435 | 1029 | Continuously reflects changes in local directory on remote one |
436 | 1029 | Host: |
438 | 1029 | Active session: [%d] %s |
439 | 1029 | Session '%s' closed. |
440 | 1029 | Local '%s' %s Remote '%s' |
441 | 1029 | '%s' deleted |
442 | 1029 | Watching for changes, press Ctrl-C to abort... |
443 | 1029 | Ski&p all |
444 | 1029 | Executes arbitrary remote command |
445 | 1029 | &Text |
446 | 1029 | &Binary |
447 | 1029 | &Exclude temporaries |
448 | 1029 | Transfer type: %s|Binary|Text|Automatic (%s) |
449 | 1029 | Filename modification: %s|No change|Upper case|Lower case|First upper case|Lower case 8.3 |
450 | 1029 | Set permissions: %s |
451 | 1029 | Add X to directories |
452 | 1029 | Preserve timestamp |
454 | 1029 | File mask: %s |
455 | 1029 | Clear 'Archive' attribute |
456 | 1029 | Do not replace invalid characters |
458 | 1029 | Do not preserve timestamp |
459 | 1029 | Do not calculate transfer size |
460 | 1029 | Default transfer settings |
461 | 1029 | Hostname: %s |
462 | 1029 | Username: %s |
463 | 1029 | Remote directory: %s |
464 | 1029 | Local directory: %s |
465 | 1029 | Scanning '%s' for subdirectories... |
466 | 1029 | Watching for changes in %d directories... |
467 | 1029 | Change in '%s' detected. |
468 | 1029 | File '%s' uploaded. |
469 | 1029 | File '%s' deleted. |
470 | 1029 | %s configured transfer settings cannot be used in current context|Some|All |
472 | 1029 | Ignore permission errors |
473 | 1029 | Using username "%s". |
474 | 1029 | Using keyboard-interactive authentication. |
475 | 1029 | Authenticating with public key "%s". |
476 | 1029 | Wrong passphrase. |
477 | 1029 | Access denied. |
478 | 1029 | Authenticating with public key "%s" from agent. |
479 | 1029 | Trying public key authentication. |
480 | 1029 | Authenticating with pre-entered password. |
481 | 1029 | Opening tunnel... |
482 | 1029 | Connection terminated. |
484 | 1029 | Searching for host... |
485 | 1029 | Connecting to host... |
486 | 1029 | Authenticating... |
487 | 1029 | Authenticated. |
488 | 1029 | Starting the session... |
489 | 1029 | Reading remote directory... |
490 | 1029 | Session started. |
491 | 1029 | Connecting through tunnel... |
492 | 1029 | Server refused our key. |
493 | 1029 | Administratively prohibited (%s). |
494 | 1029 | Connect failed (%s). |
495 | 1029 | Network error: Connection refused. |
496 | 1029 | Network error: Connection reset by peer. |
497 | 1029 | Network error: Connection timed out. |
498 | 1029 | Host: %s
User name: %s
Transfer protocol: %s |
499 | 1029 | &Resume |
500 | 1029 | The server does not support any additional FTP feature. |
501 | 1029 | The server supports these FTP additional features: |
502 | 1029 | Transfer speed limit: %u KiB/s |
503 | 1029 | &Copy Key |
504 | 1029 | &Update |
505 | 1029 | &Add |
506 | 1029 | Preserve read-only |
507 | 1029 | Comparing... |
508 | 1029 | Synchronizing... |
509 | 1029 | Nothing to synchronize. |
510 | 1029 | Unlimited |
511 | 1029 | SSL/TLS Implicit encryption |
512 | 1029 | SSL Explicit encryption |
513 | 1029 | TLS Explicit encryption |
514 | 1029 | Displays its arguments as message |
515 | 1029 | Retrieves attributes of remote file |
516 | 1029 | Host key fingerprint is %s. |
517 | 1029 | Switch -filemask overrides obsolete options include/exclude. |
600 | 1029 | CORE_VARIABLE |
601 | 1029 | SSH and SCP code based on PuTTY %s |
602 | 1029 | 0.63 |
603 | 1029 | Copyright © 1997-2013 Simon Tatham |
604 | 1029 | http://www.chiark.greenend.org.uk/~sgtatham/putty/ |
605 | 1029 | FTP code based on FileZilla %s |
606 | 1029 | 2.2.32 |
607 | 1029 | Copyright © 2001-2007 Tim Kosse |
608 | 1029 | http://filezilla-project.org/ |
609 | 1029 | This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit %s. |
610 | 1029 | Copyright © 1998-2013 The OpenSSL Project |
611 | 1029 | 1.0.1e |
612 | 1029 | http://www.openssl.org/ |
1050 | 1029 | You are trying to move remote file(s) to destination to which WinSCP cannot transfer files directly. Files will be downloaded to temporary directory instead. Transfer to final destination will be left to responsibility of target application (e.g. Windows Explorer), which WinSCP cannot control. Source files will be deleted just after download to temporary directory finishes. If target application fails to deliver temporary files, they may be lost. Please, consider copying files instead of moving.
Hint: To copy files hold down Ctrl key while dragging.
Do you still want to move the files? |
1051 | 1029 | WinSCP, %s
%s
Usage:
G:%APP% session
G:%APP% [(sftp|scp|ftp)://][user[:password]@]host[:port][/path/[file]]
G:%APP% [session] /synchronize [local_dir] [remote_dir] [/defaults]
G:%APP% [session] /keepuptodate [local_dir] [remote_dir] [/defaults]
G:%APP% [session] /privatekey=<key> /hostkey=<fingerprint>
G:%APP% [session] /certificate=<fingerprint> /implicit|explicitssl|explicittls
G:%APP% [session] /passive=on|off /timeout=<sec>
G:%APP% [session] /rawsettings setting1=value1 settings2=value2 ...
G:%APP% [/console] [/script=file] [/command command1...] [/parameter param1...]
C:%APP% [/script=file] [/command command1...] [/parameter param1...]
B:%APP% /ini=<inifile> /log=<logfile> /xmllog=<logfile>
G:%APP% /update
B:%APP% /help
G: session Name of stored session or direct session specification.
G: /synchronize Synchronizes content of two directories.
G: /keepuptodate Starts Keep remote directory up to date function.
G: /defaults Starts operation without showing options dialog.
G: /console Console (text) mode. Default mode, when invoked
G: using %APP%.com.
B: /script= Executes batch script file. If the script does not end with
B: 'exit' command, normal interactive mode follows.
B: /command Executes list of script commands.
B: /parameter Passes list of parameters to script.
B: /ini= Path to configuration INI-file.
B: /log= Turns on session logging to file.
B: /xmllog= Turns on XML logging to file.
G: /privatekey= Private key file.
G: /timeout= Server response timeout.
G: /hostkey= Fingerprint of server hostkey.
G: /passive= Passive mode (FTP protocol only).
G: /rawsettings= Configures any session settings using raw format
G: as in an INI file.
G: /certificate= Fingerprint of SSL/TLS certificate.
G: /implicit Implicit TLS/SSL (FTPS protocol only).
G: /explicitssl Explicit SSL (FTPS protocol only).
G: /explicittls Explicit TLS (FTPS protocol only).
G: /update Queries application homepage for updates.
B: /help Prints this usage. |
1100 | 1029 | WIN_ERROR |
1102 | 1029 | %s
Warning: Aborting this operation will close connection! |
1107 | 1029 | Cannot create shortcut. |
1108 | 1029 | Cannot overwrite special session '%s'. |
1109 | 1029 | Cannot explore directory '%s'. |
1110 | 1029 | No upload file list specified. |
1111 | 1029 | Can't create folder '%s'. |
1113 | 1029 | Cannot remove temporary directory '%s'. |
1114 | 1029 | Cannot open or execute file '%s' |
1115 | 1029 | Cannot launch editor '%s'. |
1117 | 1029 | Cannot open corresponding directory in the opposite panel. Directory browsing synchronisation failed. It has been turned off. |
1118 | 1029 | Cannot resolve shortcut '%s'. |
1120 | 1029 | '%s' is not valid Location Profile name. |
1121 | 1029 | '%s' is not valid Location Profile folder name. |
1122 | 1029 | Location Profile folder with name '%s' already exists. |
1123 | 1029 | Custom command description cannot contain '%s'. |
1124 | 1029 | Custom command with description '%s' already exists. |
1125 | 1029 | Cannot query application homepage for updates information. |
1126 | 1029 | Error checking for application updates. |
1131 | 1029 | Cannot register application to handle sftp:// and scp:// addresses. |
1132 | 1029 | Mutex was not released in required interval. |
1133 | 1029 | Shell drag extension mutex was not released in required interval. |
1134 | 1029 | WinSCP was not able to detect folder, where the dragged file(s) was dropped. Either you have not dropped the file(s) to regular folder (e.g. Windows Explorer) or WinSCP shell drag extension is not installed or you have not restarted the computer yet after installation. Install the extension or switch to compatible drag&drop mode (from Preferences window), which uses temporary folder for downloads. It allows you to drop files to any destination. |
1135 | 1029 | File '%s' does not contain translation for this product version. |
1136 | 1029 | File '%s' contains translation for %s version %s. |
1137 | 1029 | Shell drag extension support is enabled, but the extension was not loaded. Either it is not installed or you have not restarted the computer yet after installation. Install the extension or switch to compatible drag&drop mode (from Preferences window), which uses temporary folder for downloads. |
1138 | 1029 | GSSAPI/SSPI with Kerberos is not supported on this system. |
1139 | 1029 | Error watching for changes. |
1140 | 1029 | Error watching for changes in directory '%s'. |
1142 | 1029 | Error watching for changes of file '%s'. |
1143 | 1029 | Cannot upload edited file '%s', the session '%s' has been already closed. |
1144 | 1029 | There are too many opened files already. Please close some first. |
1146 | 1029 | %s Please remove the file. Otherwise the application will not work correctly. |
1147 | 1029 | Cannot create temporary directory '%s'. You may change root directory to store temporary files in Preferences. |
1148 | 1029 | WinSCP was not able to determine application that was started to open the file. WinSCP cannot watch for changes in the file and thus it will not upload the changed file back.
One possible reason for the problem is that the file was opened in some already running aplication.
If you want to use the application to open files from WinSCP, consider configuring it as an external editor.
Note that the file will remain in temporary folder. |
1149 | 1029 | Some of the temporary folders have not been deleted. If you have some files stored in them still opened, close them and try again. |
1150 | 1029 | To use selected custom command only one file must be selected in one panel to execute the command with the file for each selected file in an opposite panel. Alternatively same number of files can be selected in both panels to execute the command for file pairs. |
1151 | 1029 | To use selected custom command only one file must be selected in local panel. |
1152 | 1029 | Some of the selected remote files were not downloaded. The selected custom command must be executed for pairs of file, what is thus not possible. |
1153 | 1029 | Cannot initialize external console. |
1154 | 1029 | Message too long (%d bytes) to send to external console. |
1155 | 1029 | Cannot open mapping object to start comunication with external console. |
1156 | 1029 | Timeout waiting for external console to complete the command. |
1157 | 1029 | Incompatible external console protocol version %d. |
1158 | 1029 | Error adding path '%s' to search path (%%PATH%%). |
1159 | 1029 | Error removing path '%s' from search path (%%PATH%%). |
1161 | 1029 | The file '%s' is already opened in external editor (application) or is being uploaded. |
1162 | 1029 | You have not specified any autoselection rule mask. |
1163 | 1029 | Transfer settings preset with description '%s' already exists. |
1164 | 1029 | Custom command '%s' cannot be executed right now. Please select files for the command first. |
1165 | 1029 | Cannot reload file '%s', the session '%s' has been already closed. |
1167 | 1029 | Automatic actions are disabled when URL address is provided on command-line. |
1168 | 1029 | The password cannot be decrypted. |
1169 | 1029 | You did not enter the correct current master password. |
1170 | 1029 | New and re-entered master passwords are not the same. |
1172 | 1029 | External console output is redirected to a pipe. Make sure the pipe is being read from. |
1300 | 1029 | WIN_CONFIRMATION |
1301 | 1029 | Session with name '%s' already exists. Overwrite? |
1302 | 1029 | Directory '%s' doesn't exist. Create? |
1303 | 1029 | Cancel current operation? |
1304 | 1029 | Cancel file transfer?
Operation can't be canceled in the middle of file transfer.
Press 'Yes' to cancel file transfer and to close connection.
Press 'No' to finish current file transfer.
Press 'Cancel' to continue operation. |
1305 | 1029 | Are you sure you want to delete file '%s'? |
1306 | 1029 | Are you sure you want to delete %d selected files? |
1307 | 1029 | Terminate session '%s' and close application? |
1308 | 1029 | Never ask me a&gain |
1309 | 1029 | Too little space on temporary drive!
When dragging files from remote directory, files are downloaded first to temporary directory '%s'. There are %s free on the drive. Total size of dragged files is %s.
Note: Temporary directory can be changed from Preferences window.
Do you still want to download files? |
1311 | 1029 | Add directory '%s' to bookmarks? |
1313 | 1029 | Create desktop shortcut for session '%s'? |
1314 | 1029 | Set current session settings as default? |
1315 | 1029 | &Skip |
1316 | 1029 | File was modified. Save changes? |
1317 | 1029 | Create Explorer's 'send to' shortcut for session '%s'? |
1318 | 1029 | Create selected icon/shortcut? |
1319 | 1029 | Terminate all sessions and close application? |
1320 | 1029 | Delete selected Location Profile folder? |
1321 | 1029 | &Previous |
1322 | 1029 | &Next |
1324 | 1029 | Do you want to register application to handle sftp:// and scp:// addresses? |
1325 | 1029 | Do you want to cleanup data stored by the application on this computer? |
1326 | 1029 | %s
Do you want to close application? |
1327 | 1029 | %%s
Do you want to terminate %d remaining session(s) and close the application? |
1328 | 1029 | There are still some background transfers in queue. Do you want to disconnect anyway?
Warning: Pressing 'OK' will terminate all transfers immediatelly. |
1329 | 1029 | Current %s session does not support command you request. Separate shell session may be opened to process the command. Do you want to open separate shell session?
Note: The server must provide Unix-like shell and the shell must use same path syntax as current %s session. |
1330 | 1029 | There are some opened files. Please close them before exiting application.
Beware: If you ignore this message, opened files may remain in temporary directory. |
1331 | 1029 | WinSCP has found %d temporary folders, which it has probably created in past. These folders may contain files previously edited or downloaded. Do you want to delete these folders? You may also open the folders to review their content and to delete them yourself. |
1332 | 1029 | &Open |
1333 | 1029 | Never show this message a&gain |
1335 | 1029 | Do you want to create desktop icon for all users?
You must have administrator priviledges for this. |
1336 | 1029 | Do you want to add application path '%s' to system search path (%%PATH%%)? |
1337 | 1029 | Editor (application) launched to open file '%s' was closed too early. If it was not closed by you, it may happened because your external editor opens multiple files in one window (process). Additional launched instances of the editor then just sends the new file to existing instance of editor and closes itself immediately. To support this kind of editors, WinSCP must adapt its behaviour, not to remove temporary file when the process exits, but to keep it as long as WinSCP is running. The behaviour can be turned on by unsetting editor preference option 'External editor opens each file in separate window (process)'. If your editor is not of this kind, ignore this message and let the file be removed from temporary directory now.
Do you want to remove the opened file now? (By pressing 'No' you will enable the special behaviour and keep the file in temporary folder.) |
1339 | 1029 | You have overrided pre-selected synchronisation direction. By default the direction is determined from file panel that was active before you run the synchronise function.
Do you want to make direction you have selected the default? |
1340 | 1029 | Do you want to perform full synchronisation of the remote directory first?
Function 'Keep remote directory up to date' works correctly only, if the remote directory is synchronised with the local one before it starts. |
1341 | 1029 | Are you sure you want to delete stored session '%s'? |
1342 | 1029 | More than %d directories and subdirectories found. Watching for changes in large number of directories can significantly degrade performace of the computer.
Do you want to scan for another up to %d directories? |
1343 | 1029 | %s (%d s) |
1344 | 1029 | Are you sure you want to move file '%s' to recycle bin? |
1345 | 1029 | Are you sure you want to move %d selected files to recycle bin? |
1346 | 1029 | File was modified. Changes will be lost, if file is reloaded. Continue? |
1347 | 1029 | &Configure... |
1348 | 1029 | Cannot open corresponding directory in the opposite panel.
Do you want to try to create directory '%s'? |
1349 | 1029 | Add to &shared bookmarks |
1350 | 1029 | Do you want to send the message to WinSCP site?
There is no help page associated with the message. WinSCP can search its documentation site for the message text for you.
Note: WinSCP will send the message as is over unsecure Internet connection. Please check that the message does not contain any data you want to protect, such as names of files, accounts or hosts. |
1351 | 1029 | Your password is too simple and may not provide enough security against dictionary or brute force attacks.
Are you sure you want to use it?
Note: good passwords have at least six characters and contain both lowercase and uppercase letters, numbers and special characters, such as delimiters, symbols, letters with accent, etc. |
1400 | 1029 | WIN_INFORMATION |
1401 | 1029 | %s - %s |
1402 | 1029 | No differences found. |
1403 | 1029 | Opens session '%s'
%s |
1404 | 1029 | Waiting for the document to close... |
1405 | 1029 | %s (upload using SFTP or FTP) |
1406 | 1029 | %s (upload using SFTP or FTP) |
1407 | 1029 | Local: %s
Remote: %s |
1408 | 1029 | &Touch |
1409 | 1029 | &Execute |
1412 | 1029 | %d error(s) occured during last operation. Do you want to see it/them? |
1413 | 1029 | Error %d of %d:
%s |
1414 | 1029 | You have the latest version. |
1415 | 1029 | New version %s was released.%s |
1416 | 1029 | '%s' command ¶meter value: |
1417 | 1029 | '%s' command parameter |
1460 | 1029 | URL: %s Protocol |
1461 | 1029 | Connecting... |
1462 | 1029 | Query |
1463 | 1029 | Error |
1464 | 1029 | Prompt |
1465 | 1029 | Waiting... |
1466 | 1029 | Ta&r/GZip... |
1467 | 1029 | &Archive Name: |
1468 | 1029 | &UnTar/GZip... |
1469 | 1029 | &Extract to directory: |
1470 | 1029 | &File Compare |
1471 | 1029 | &Grep... |
1472 | 1029 | &Search for pattern: |
1473 | 1029 | %d Reading directory |
1474 | 1029 | Calculating... |
1475 | 1029 | %s |
1476 | 1029 | &Download |
1477 | 1029 | &Check again |
1478 | 1029 | Transfer settings preset '%s' was automatically selected. |
1479 | 1029 | Returned back to transfer settings preset '%s'. |
1480 | 1029 | Returned back to default transfer settings. |
1481 | 1029 | Autoselection rule:
%s |
1483 | 1029 | Ad Hoc |
1484 | 1029 | Suspended |
1485 | 1029 | &Internal editor |
1486 | 1029 | Application launched to open file '%s' was closed too early. If it was not closed by you, it may happened because the application opens multiple files in one window (process). Additional launched instances of the application then just sends the new file to existing instance of application and closes itself immediately. WinSCP can support this kind of applications as external editor only.
If you want to use the application to open files from WinSCP, consider configuring it as an external editor. |
1488 | 1029 | Edit (external)|Edit selected file(s) using external editor '%s' |
1489 | 1029 | * matches any number of characters.
? matches exactly one character.
[abc] matches one character from the set.
[a-z] matches one character from the range.
Example: *.html; photo??.png |
1490 | 1029 | Mask can be extended with path mask.
Example: */public_html/*.html |
1491 | 1029 | Patterns:
!! expands to exclamation mark
! expands to file name
!& expands to list of selected files (quoted, space-delimited)
!/ expands to current remote path
!@ expands to current session hostname
!U expands to current session username
!P expands to current session password
!?prompt[\]?default! expands to user-entered value with given prompt and default (optional \ avoids escaping)
Local command patterns:
!^! expands to file name from local panel
Example:
grep "!?Pattern:?!" !& |
1492 | 1029 | All background transfers were finished. Connection was closed. |
1493 | 1029 | Reading of remote directory was cancelled. |
1494 | 1029 | Synchronized browsing was turned %s.|on|off |
1495 | 1029 | Showing of hidden files was turned %s.|on|off |
1496 | 1029 | Automatic refresh of remote directory after operation was turned %s.|on|off |
1497 | 1029 | Background transfer requires your attention. |
1498 | 1029 | Transfer queue is empty. |
1499 | 1029 | !Y year
!M month
!D day
!T time
!@ hostname
!S session name
Example: C:\!S!T.log |
1500 | 1029 | Passive mode must be enabled when FTP connection through proxy is selected. |
1501 | 1029 | Check for application updates is temporarily disabled. Please try again later. |
1502 | 1029 | &Go To |
1503 | 1029 | What's New |
1505 | 1029 | Operation was completed. |
1506 | 1029 | &Print |
1507 | 1029 | &Associated application |
1508 | 1029 | On |
1509 | 1029 | Off |
1510 | 1029 | Auto |
1511 | 1029 | Master password successfully set. Your stored passwords are secured by AES cipher now. |
1512 | 1029 | Master password successfully changed. |
1513 | 1029 | You have deleted your master password. Your stored passwords are not secured now. |
1514 | 1029 | Master password: |
1515 | 1029 | Last checked on: %s |
1516 | 1029 | Will check again on: %s |
1517 | 1029 | Recent Sessions |
1518 | 1029 | Masks are separated by semicolon or comma.
Place exclude masks after pipe. |
1519 | 1029 | Mask ending with slash selects directories. |
1520 | 1029 | >size matches file larger than size
<size matches file smaller than size
>yyyy-mm-dd matches file modified after the date
<yyyy-mm-dd matches file modified before the date
Example: *.zip>1G; <2012-01-21 |
1521 | 1029 | See help for more options. |
1522 | 1029 | UTF-8 |
1523 | 1029 | Following usage statistics data is anonymously sent to WinSCP team.
Over the time other metrics can be collected, please come back later to check or consult Help. |
1524 | 1029 | There is no usage statistics data collected yet. Please try again later or consult Help. |
1600 | 1029 | WIN_FORMS_STRINGS |
1601 | 1029 | No session log. |
1602 | 1029 | Logging to file disabled. |
1603 | 1029 | No log |
1604 | 1029 | Session '%s' log |
1605 | 1029 | %s file '%s' to %s: |
1606 | 1029 | %s %d files to %s: |
1607 | 1029 | Copy |
1608 | 1029 | Move |
1609 | 1029 | local directory |
1610 | 1029 | remote directory |
1611 | 1029 | Copy |
1612 | 1029 | Move |
1613 | 1029 | drop target |
1614 | 1029 | Copy |
1615 | 1029 | Move |
1616 | 1029 | Copying |
1617 | 1029 | Moving |
1618 | 1029 | Deleting |
1619 | 1029 | Setting properties |
1620 | 1029 | Temporary directory |
1621 | 1029 | New folder |
1624 | 1029 | Deselect |
1625 | 1029 | Select |
1626 | 1029 | %d file |
1627 | 1029 | %d files |
1628 | 1029 | %d folder |
1629 | 1029 | %d folders |
1630 | 1029 | %d symbolic link |
1631 | 1029 | %d symbolic links |
1632 | 1029 | %s Properties |
1633 | 1029 | %s, ... Properties |
1634 | 1029 | Enter valid group name. |
1635 | 1029 | Enter valid owner name. |
1636 | 1029 | Back to %s |
1637 | 1029 | Forward to %s |
1640 | 1029 | Connection time |
1641 | 1029 | Compression (%s) |
1644 | 1029 | File selection info |
1645 | 1029 | Compression (client � server: %s, server � client: %s) |
1647 | 1029 | Open saved session '%s' (hold down Shift to open session in new window) |
1649 | 1029 | %s license |
1657 | 1029 | Open directory |
1658 | 1029 | Manage bookmarks |
1664 | 1029 | Line: %d/%d |
1665 | 1029 | Column: %d |
1666 | 1029 | Character: %d (0x%.2x) |
1667 | 1029 | Modified |
1668 | 1029 | Could not find the string '%s'. |
1669 | 1029 | Total replacements performed: %d |
1670 | 1029 | Go to line |
1671 | 1029 | Line number: |
1672 | 1029 | Invalid line number. |
1673 | 1029 | Edit link/shortcut |
1674 | 1029 | Add link/shortcut |
1675 | 1029 | Disconnected. |
1676 | 1029 | Connecting... |
1677 | 1029 | Select session '%s' |
1678 | 1029 | Add Location Profile |
1679 | 1029 | Location Profile name: |
1680 | 1029 | Move Location Profile |
1681 | 1029 | New folder name: |
1682 | 1029 | Save session as |
1683 | 1029 | &Save session as: |
1684 | 1029 | Save &password (not recommended) |
1686 | 1029 | Executing custom command |
1687 | 1029 | Execute custom command '%s' |
1692 | 1029 | D |
1693 | 1029 | R |
1694 | 1029 | %s, %d pt
The Quick Brown Fox Jumps Over The Lazy Dog |
1695 | 1029 | Unknown |
1696 | 1029 | Calculating directory size |
1700 | 1029 | General configuration |
1701 | 1029 | Stored sessions |
1702 | 1029 | Cached host keys |
1703 | 1029 | Configuration INI file |
1704 | 1029 | Random seed file |
1705 | 1029 | Select local directory. |
1706 | 1029 | Moving |
1709 | 1029 | Move |
1710 | 1029 | Keep remote directory up to date |
1711 | 1029 | Keeping remote directory up to date ... |
1712 | 1029 | Temporary folders |
1713 | 1029 | New file |
1714 | 1029 | Edit file |
1715 | 1029 | &Enter file name: |
1716 | 1029 | Duplicate file '%s' to remote directory: |
1717 | 1029 | Duplicate %d files to remote directory: |
1718 | 1029 | Duplicate |
1719 | 1029 | Copying |
1720 | 1029 | Add Custom Command |
1721 | 1029 | Edit Custom Command |
1722 | 1029 | L |
1723 | 1029 | R |
1728 | 1029 | Get &More... |
1729 | 1029 | Select editor application. |
1730 | 1029 | Executable files (*.exe)|*.exe|All files (*.*)|*.* |
1731 | 1029 | %s of %s in %s of %s |
1732 | 1029 | Add transfer settings preset |
1733 | 1029 | Edit transfer settings preset |
1734 | 1029 | &Default |
1735 | 1029 | &Configure... |
1736 | 1029 | Cu&stom... |
1737 | 1029 | Custom Command |
1738 | 1029 | Add editor |
1739 | 1029 | Edit editor |
1740 | 1029 | %s, Based on %s version %s |
1741 | 1029 | &Open |
1742 | 1029 | &Copy |
1743 | 1029 | Same si&ze only |
1744 | 1029 | Number of Licenses: %s|Unlimited |
1745 | 1029 | Product ID: %s |
1746 | 1029 | %s (Expiration on %s) |
1747 | 1029 | %s Educational License |
1748 | 1029 | Getting properties |
1750 | 1029 | SSH implementation |
1751 | 1029 | Encryption algorithm |
1752 | 1029 | Compression |
1753 | 1029 | File transfer protocol |
1754 | 1029 | Can change permissions |
1755 | 1029 | Can change owner/group |
1756 | 1029 | Can execute arbitrary command |
1757 | 1029 | Can create symlink/hardlink |
1758 | 1029 | Can lookup user groups |
1759 | 1029 | Can duplicate remote files |
1760 | 1029 | Native text (ASCII) mode transfers |
1761 | 1029 | Can check available space |
1762 | 1029 | Total bytes on device |
1763 | 1029 | Free bytes on device |
1764 | 1029 | Total bytes for user |
1765 | 1029 | Free bytes for user |
1766 | 1029 | Bytes per allocation unit |
1767 | 1029 | Unknown |
1768 | 1029 | Find PuTTY executable. |
1769 | 1029 | PuTTY executable (putty.exe)|putty.exe|Executable files (*.exe)|*.exe|All files (*.*)|*.* |
1770 | 1029 | %s of %s|N/A |
1771 | 1029 | Comparing |
1772 | 1029 | Synchronization |
1773 | 1029 | Authentication Banner |
1774 | 1029 | INI files (*.ini)|*.ini|All files (*.*)|*.* |
1775 | 1029 | Select file to export configuration to |
1776 | 1029 | &Last: %s |
1777 | 1029 | &Last |
1778 | 1029 | Calculating file checksum |
1779 | 1029 | Can calculate file checksum |
1780 | 1029 | Unknown |
1781 | 1029 | Protocol in use |
1783 | 1029 | Insecure connection |
1784 | 1029 | Secure connection (%s) |
1785 | 1029 | Protocol commands only |
1786 | 1029 | Remote system |
1787 | 1029 | Session protocol |
1790 | 1029 | My documents |
1791 | 1029 | Desktop |
1792 | 1029 | Command |
1793 | 1029 | Set as &default |
1794 | 1029 | -- warn below here -- |
1795 | 1029 | 3DES |
1796 | 1029 | Blowfish |
1797 | 1029 | AES (SSH-2 only) |
1798 | 1029 | DES |
1799 | 1029 | Arcfour (SSH-2 only) |
1800 | 1029 | -- warn below here -- |
1801 | 1029 | Diffie-Hellman group 1 |
1802 | 1029 | Diffie-Hellman group 14 |
1803 | 1029 | Diffie-Hellman group exchange |
1804 | 1029 | RSA-based key exchange |
1807 | 1029 | Select local proxy application |
1808 | 1029 | Patterns:
\n for new line
\r for carriage return
\t for tab
\xXX for any hex ascii code
\\ for backslash
%host expands to hostname
%port expands to port number
%user expands to proxy username
%pass expands to proxy password
%% for percent sign |
1809 | 1029 | Session folder with name '%s' already exists. |
1810 | 1029 | Are you sure you want to delete session folder '%s' with %d session(s)? |
1811 | 1029 | Cannot delete special session '%s'. |
1812 | 1029 | Create Session Folder |
1813 | 1029 | New folder name: |
1814 | 1029 | Open saved sessions folder '%s' |
1815 | 1029 | How to purchase a license... |
1816 | 1029 | Target &directory: |
1817 | 1029 | Do you want to open separate shell session to duplicate the file(s)?
Current session does not support direct duplication of remote files. Separate shell session may be opened to process the duplication. Alternatively your may duplicate the file(s) via local temporary copy. |
1818 | 1029 | Editor |
1819 | 1029 | %s (%s) |
1820 | 1029 | %d hidden |
1821 | 1029 | %d filtered |
1822 | 1029 | Filter |
1823 | 1029 | Current session allows changing ownership by UID only. It was not possible to resolve UID from account name "%s". Specify UID explicitly instead. |
1824 | 1029 | Transfer on &background |
1825 | 1029 | %s (add to transfer queue) |
1826 | 1029 | None |
1827 | 1029 | Select keyboard shortcut |
1828 | 1029 | &Keyboard shortcut: |
1829 | 1029 | Unlimited |
1830 | 1029 | Master password |
1831 | 1029 | &Current master password: |
1832 | 1029 | &New master password: |
1833 | 1029 | &Re-enter master password: |
1834 | 1029 | Save &password (protected by master password) |
1835 | 1029 | Searching in %s |
1836 | 1029 | Find |
1837 | 1029 | Finding ... |
1838 | 1029 | Done. |
1839 | 1029 | Aborted. |
1840 | 1029 | &Start |
1841 | 1029 | &Stop |
1842 | 1029 | Save &password |
1843 | 1029 | Cancelling... |
1844 | 1029 | Encoding: %s |
1845 | 1029 | File was modified. Changes will be lost, if file is reloaded using different encoding. Continue? |
1900 | 1029 | WIN_VARIABLE |
1901 | 1029 | Copyright © 2000-2013 Martin Prikryl |
1902 | 1029 | http://winscp.net/ |
1903 | 1029 | http://winscp.net/eng/docs/history |
1905 | 1029 | http://winscp.net/forum/ |
1906 | 1029 | http://winscp.net/updates.php |
1907 | 1029 | http://winscp.net/eng/download.php |
1908 | 1029 | http://winscp.net/eng/donate.php |
1909 | 1029 | http://winscp.net/eng/docs/?ver=%s&lang=%s |
1910 | 1029 | http://winscp.net/eng/docs/%s?ver=%s&lang=%s |
1911 | 1029 | http://winscp.net/eng/translations.php |
1912 | 1029 | http://winscp.net/eng/docs/search.php?q=%s&ver=%s&lang=%s |
2000 | 1029 | Connected |
2001 | 1029 | Connected with %s. Waiting for welcome message... |
2003 | 1029 | Connected with %s, negotiating SSL connection... |
2004 | 1029 | Connecting to %s ... |
2005 | 1029 | Directory listing successful |
2006 | 1029 | Disconnected from server |
2008 | 1029 | Starting download of %s |
2009 | 1029 | Download successful |
2011 | 1029 | Trying to access %s through ftp proxy... |
2018 | 1029 | Retrieving directory listing... |
2019 | 1029 | SSL connection established. Waiting for welcome message... |
2020 | 1029 | SSL connection established |
2021 | 1029 | Starting upload of %s |
2022 | 1029 | Upload successful |
2025 | 1029 | Retrieving file information successful |
2026 | 1029 | Retrieving file information... |
2027 | 1029 | Could not retrieve file information |
2101 | 1029 | Could not create socket in the specified port range. |
2103 | 1029 | Can't establish SSL connection |
2105 | 1029 | Could not retrieve directory listing |
2108 | 1029 | Can't initialize SSL library |
2112 | 1029 | Transfer channel can't be opened. Reason: %s |
2114 | 1029 | Can't resolve host name |
2115 | 1029 | Resume command not supported by server, overwriting file. |
2116 | 1029 | Resume command not supported by server, but local and remote filesize are equal. |
2117 | 1029 | Unable to send command. Disconnected. |
2119 | 1029 | Peer certificate rejected |
2121 | 1029 | Download aborted |
2132 | 1029 | File already exists |
2137 | 1029 | Proxy requires authentication |
2138 | 1029 | Required authtype reported by proxy server is unknown or not supported |
2139 | 1029 | Can't resolve host of proxy server |
2140 | 1029 | Can't connect to proxy server |
2141 | 1029 | Proxy request failed, can't connect through proxy server |
2153 | 1029 | Timeout detected. |
2154 | 1029 | Upload aborted |
2160 | 1029 | Could not set file pointer |
2161 | 1029 | Unknown error in SSL layer |
2162 | 1029 | Could not verify SSL certificate |
61446 | 1029 | an unnamed file |
61472 | 1029 | No error message is available. |
61473 | 1029 | An unsupported operation was attempted. |
61474 | 1029 | A required resource was unavailable. |
61475 | 1029 | Out of memory. |
61476 | 1029 | An unknown error has occurred. |
61703 | 1029 | Failed to launch help. |
61704 | 1029 | Internal application error. |
61705 | 1029 | Command failed. |
61706 | 1029 | Insufficient memory to perform operation. |
61707 | 1029 | System registry entries have been removed and the INI file (if any) was deleted. |
61708 | 1029 | Not all of the system registry entries (or INI file) were removed. |
61709 | 1029 | This program requires the file %s, which was not found on this system. |
61710 | 1029 | This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s. |
61712 | 1029 | Please enter an integer. |
61713 | 1029 | Please enter a number. |
61714 | 1029 | Please enter an integer between %1 and %2. |
61715 | 1029 | Please enter a number between %1 and %2. |
61716 | 1029 | Please enter no more than %1 characters. |
61717 | 1029 | Please select a button. |
61718 | 1029 | Please enter an integer between 0 and 255. |
61719 | 1029 | Please enter a positive integer. |
61720 | 1029 | Please enter a date and/or time. |
61721 | 1029 | Please enter a currency. |
61728 | 1029 | Unexpected file format. |
61729 | 1029 | %1
Cannot find this file.
Please verify that the correct path and file name are given. |
61730 | 1029 | Destination disk drive is full. |
61731 | 1029 | Unable to read from %1, it is opened by someone else. |
61732 | 1029 | Unable to write to %1, it is read-only or opened by someone else. |
61733 | 1029 | An unexpected error occurred while reading %1. |
61734 | 1029 | An unexpected error occurred while writing %1. |
61836 | 1029 | Unable to read write-only property. |
61837 | 1029 | Unable to write read-only property. |
61856 | 1029 | No error occurred. |
61857 | 1029 | An unknown error occurred while accessing %1. |
61858 | 1029 | %1 was not found. |
61859 | 1029 | %1 contains an invalid path. |
61860 | 1029 | %1 could not be opened because there are too many open files. |
61861 | 1029 | Access to %1 was denied. |
61862 | 1029 | An invalid file handle was associated with %1. |
61863 | 1029 | %1 could not be removed because it is the current directory. |
61864 | 1029 | %1 could not be created because the directory is full. |
61865 | 1029 | Seek failed on %1 |
61866 | 1029 | A hardware I/O error was reported while accessing %1. |
61867 | 1029 | A sharing violation occurred while accessing %1. |
61868 | 1029 | A locking violation occurred while accessing %1. |
61869 | 1029 | Disk full while accessing %1. |
61870 | 1029 | An attempt was made to access %1 past its end. |
61872 | 1029 | No error occurred. |
61873 | 1029 | An unknown error occurred while accessing %1. |
61874 | 1029 | An attempt was made to write to the reading %1. |
61875 | 1029 | An attempt was made to access %1 past its end. |
61876 | 1029 | An attempt was made to read from the writing %1. |
61877 | 1029 | %1 has a bad format. |
61878 | 1029 | %1 contained an unexpected object. |
61879 | 1029 | %1 contains an incorrect schema. |
65056 | 0 | &Shortcut(s) Create Here |
65057 | 0 | &Abort |
65058 | 0 | Toolbar item index out of range |
65059 | 0 | Toolbar item already inserted |
65060 | 0 | An item viewer associated the specified item could not be found |
65061 | 0 | More Buttons| |
65062 | 0 | A TTBDock control cannot be placed inside a tool window or another TTBDock |
65063 | 0 | Cannot change Position of a TTBDock if it already contains controls |
65064 | 0 | Cannot save dockable window's position because Name property is not set |
65065 | 0 | Cannot save dockable window's position because DockedTo's Name property not set |
65072 | 0 | Changed |
65073 | 0 | Attr |
65074 | 0 | Ext |
65075 | 0 | Filesystem Operation |
65076 | 0 | \/:*?"<>| |
65077 | 0 | |
65078 | 0 | New name contains invalid characters %s |
65079 | 0 | File Operation |
65080 | 0 | %s is a invalid drive letter. |
65081 | 0 | Rights |
65082 | 0 | Owner |
65083 | 0 | Group |
65084 | 0 | Link target |
65085 | 0 | Type |
65086 | 0 | &Copy Here |
65087 | 0 | &Move Here |
65088 | 0 | File already exists: |
65089 | 0 | Filename contains invalid characters: |
65090 | 0 | File %s |
65091 | 0 | %u Files |
65092 | 0 | %u Directories |
65093 | 0 | Parent directory |
65094 | 0 | Can't terminate icon update thread. |
65095 | 0 | DragDrop Error: %d |
65096 | 0 | Drive '%s:' is not ready. |
65097 | 0 | Directory '%s' doesn't exist. |
65098 | 0 | Drag&drop error: %d |
65099 | 0 | / <root> |
65100 | 0 | Filesystem Operation |
65101 | 0 | Name |
65102 | 0 | Size |
65103 | 0 | Type |
65104 | 0 | Start index out of bounds (%d) |
65105 | 0 | Invalid count (%d) |
65106 | 0 | Invalid destination index (%d) |
65107 | 0 | Invalid code page |
65108 | 0 | Invalid encoding name |
65109 | 0 | Browse |
65110 | 0 | All files (*.*)|*.* |
65111 | 0 | Invalid file name - %s |
65112 | 0 | Socket error (%s) |
65113 | 0 | Timeout |
65114 | 0 | Unknown error |
65115 | 0 | Received response %d %s from %s |
65116 | 0 | Exceeded maximal redirect limie %d |
65117 | 0 | Can't find any valid path. |
65118 | 0 | UNC paths are not supported. |
65119 | 0 | Can't rename file or directory: |
65120 | 0 | Tue |
65121 | 0 | Wed |
65122 | 0 | Thu |
65123 | 0 | Fri |
65124 | 0 | Sat |
65125 | 0 | Sunday |
65126 | 0 | Monday |
65127 | 0 | Tuesday |
65128 | 0 | Wednesday |
65129 | 0 | Thursday |
65130 | 0 | Friday |
65131 | 0 | Saturday |
65132 | 0 | Unable to create directory |
65133 | 0 | Invalid source array |
65134 | 0 | Invalid destination array |
65135 | 0 | Character index out of bounds (%d) |
65136 | 0 | Nov |
65137 | 0 | Dec |
65138 | 0 | January |
65139 | 0 | February |
65140 | 0 | March |
65141 | 0 | April |
65142 | 0 | May |
65143 | 0 | June |
65144 | 0 | July |
65145 | 0 | August |
65146 | 0 | September |
65147 | 0 | October |
65148 | 0 | November |
65149 | 0 | December |
65150 | 0 | Sun |
65151 | 0 | Mon |
65152 | 0 | Feature not implemented |
65153 | 0 | %s (%s, line %d) |
65154 | 0 | Abstract Error |
65155 | 0 | Access violation at address %p in module '%s'. %s of address %p |
65156 | 0 | System Error. Code: %d.
%s |
65157 | 0 | A call to an OS function failed |
65158 | 0 | Jan |
65159 | 0 | Feb |
65160 | 0 | Mar |
65161 | 0 | Apr |
65162 | 0 | May |
65163 | 0 | Jun |
65164 | 0 | Jul |
65165 | 0 | Aug |
65166 | 0 | Sep |
65167 | 0 | Oct |
65168 | 0 | Custom variant type (%s%.4x) already used by %s |
65169 | 0 | Custom variant type (%s%.4x) is not usable |
65170 | 0 | Too many custom variant types have been registered |
65171 | 0 | Could not convert variant of type (%s) into type (%s) |
65172 | 0 | Overflow while converting variant of type (%s) into type (%s) |
65173 | 0 | Variant overflow |
65174 | 0 | Invalid argument |
65175 | 0 | Invalid variant type |
65176 | 0 | Operation not supported |
65177 | 0 | Unexpected variant error |
65178 | 0 | External exception %x |
65179 | 0 | Assertion failed |
65180 | 0 | Interface not supported |
65181 | 0 | Exception in safecall method |
65182 | 0 | Object lock not owned |
65183 | 0 | Monitor support function not initialized |
65184 | 0 | Exception %s in module %s at %p.
%s%s |
65185 | 0 | Application Error |
65186 | 0 | Format '%s' invalid or incompatible with argument |
65187 | 0 | No argument for format '%s' |
65188 | 0 | Variant method calls not supported |
65189 | 0 | Read |
65190 | 0 | Write |
65191 | 0 | Format string too long |
65192 | 0 | Error creating variant or safe array |
65193 | 0 | Variant or safe array index out of bounds |
65194 | 0 | Variant or safe array is locked |
65195 | 0 | Invalid variant type conversion |
65196 | 0 | Invalid variant operation |
65197 | 0 | Invalid NULL variant operation |
65198 | 0 | Invalid variant operation (%s%.8x)
%s |
65199 | 0 | Custom variant type (%s%.4x) is out of range |
65200 | 0 | Invalid numeric input |
65201 | 0 | Division by zero |
65202 | 0 | Range check error |
65203 | 0 | Integer overflow |
65204 | 0 | Invalid floating point operation |
65205 | 0 | Floating point division by zero |
65206 | 0 | Floating point overflow |
65207 | 0 | Floating point underflow |
65208 | 0 | Invalid pointer operation |
65209 | 0 | Invalid class typecast |
65210 | 0 | Access violation at address %p. %s of address %p |
65211 | 0 | Access violation |
65212 | 0 | Stack overflow |
65213 | 0 | Control-C hit |
65214 | 0 | Privileged instruction |
65215 | 0 | Operation aborted |
65216 | 0 | Cannot have multiple single cast observers added to the observers collection |
65217 | 0 | The object does not implement the observer interface |
65218 | 0 | No single cast observer with ID %s was added to the observer collection |
65219 | 0 | No multi cast observer with ID %s was added to the observer collection |
65220 | 0 | Observer is not available |
65221 | 0 | <unknown> |
65222 | 0 | '%s' is not a valid floating point value |
65223 | 0 | '%d.%d' is not a valid timestamp |
65224 | 0 | '%s' is not a valid GUID value |
65225 | 0 | Invalid argument to date encode |
65226 | 0 | Out of memory |
65227 | 0 | I/O error %d |
65228 | 0 | Too many open files |
65229 | 0 | File access denied |
65230 | 0 | Read beyond end of file |
65231 | 0 | Disk full |
65232 | 0 | Duplicates not allowed |
65233 | 0 | Specified Login Credential Service not found |
65234 | 0 | %s (Version %d.%d, Build %d, %5:s) |
65235 | 0 | %s Service Pack %4:d (Version %1:d.%2:d, Build %3:d, %5:s) |
65236 | 0 | 32-bit Edition |
65237 | 0 | 64-bit Edition |
65238 | 0 | Windows |
65239 | 0 | Windows Vista |
65240 | 0 | Windows Server 2008 |
65241 | 0 | Windows 7 |
65242 | 0 | Windows Server 2008 R2 |
65243 | 0 | Windows 2000 |
65244 | 0 | Windows XP |
65245 | 0 | Windows Server 2003 |
65246 | 0 | Windows Server 2003 R2 |
65247 | 0 | Observer is not supported |
65248 | 0 | Invalid Timespan format |
65249 | 0 | Timespan element too long |
65250 | 0 | ''%s'' is not a valid date |
65251 | 0 | ''%s'' is not a valid date and time |
65252 | 0 | ''%s'' is not a valid integer value |
65253 | 0 | ''%s'' is not a valid time |
65254 | 0 | Invalid argument to time encode |
65255 | 0 | No context-sensitive help installed |
65256 | 0 | No help found for context %d |
65257 | 0 | Unable to open Index |
65258 | 0 | Unable to open Search |
65259 | 0 | Unable to find a Table of Contents |
65260 | 0 | No topic-based help system installed |
65261 | 0 | No help found for %s |
65262 | 0 | Argument out of range |
65263 | 0 | Item not found |
65264 | 0 | The specified path was not found |
65265 | 0 | The path format is not supported |
65266 | 0 | The drive cannot be found |
65267 | 0 | The specified file was not found |
65268 | 0 | The given "%s" local time is invalid (situated within the missing period prior to DST). |
65269 | 0 | No help viewer that supports filters |
65270 | 0 | String index out of range (%d). Must be >= 1 and <= %d |
65271 | 0 | Invalid UTF32 character value. Must be >= 0 and <= $10FFFF, excluding surrogate pair ranges |
65272 | 0 | High surrogate char without a following low surrogate char at index: %d. Check that the string is encoded properly |
65273 | 0 | Low surrogate char without a preceding high surrogate char at index: %d. Check that the string is encoded properly |
65274 | 0 | Length of Strings and Objects arrays must be equal |
65275 | 0 | Invalid Timeout value: %s |
65276 | 0 | Timespan too long |
65277 | 0 | The duration cannot be returned because the absolute value exceeds the value of TTimeSpan.MaxValue |
65278 | 0 | Value cannot be NaN |
65279 | 0 | Negating the minimum value of a Timespan is invalid |
65280 | 0 | String expected |
65281 | 0 | %s expected |
65282 | 0 | %s not in a class registration group |
65283 | 0 | Property %s does not exist |
65284 | 0 | Stream write error |
65285 | 0 | Thread creation error: %s |
65286 | 0 | Thread Error: %s (%d) |
65287 | 0 | Cannot terminate an externally created thread |
65288 | 0 | Cannot wait for an externally created thread |
65289 | 0 | Cannot call Start on a running or suspended thread |
65290 | 0 | Cannot call CheckTerminated on an externally created thread |
65291 | 0 | Cannot call SetReturnValue on an externally create thread |
65292 | 0 | Parameter %s cannot be a negative value |
65293 | 0 | Input buffer exceeded for %s = %d, %s = %d |
65294 | 0 | Invalid characters in path |
65295 | 0 | The specified path is too long |
65296 | 0 | List index out of bounds (%d) |
65297 | 0 | Out of memory while expanding memory stream |
65298 | 0 | %s has not been registered as a COM class |
65299 | 0 | Number expected |
65300 | 0 | ANSI or UTF8 encoding expected |
65301 | 0 | %s on line %d |
65302 | 0 | Error reading %s%s%s: %s |
65303 | 0 | Stream read error |
65304 | 0 | Property is read-only |
65305 | 0 | Failed to create key %s |
65306 | 0 | Failed to get data for '%s' |
65307 | 0 | Invalid component registration |
65308 | 0 | Failed to set data for '%s' |
65309 | 0 | Resource %s not found |
65310 | 0 | %s.Seek not implemented |
65311 | 0 | Operation not allowed on sorted list |
65312 | 0 | Cannot open file "%s". %s |
65313 | 0 | Identifier expected |
65314 | 0 | Unable to write to %s |
65315 | 0 | Invalid binary value |
65316 | 0 | Invalid file name - %s |
65317 | 0 | Invalid stream format |
65318 | 0 | '%s' is an invalid mask at (%d) |
65319 | 0 | ''%s'' is not a valid component name |
65320 | 0 | Invalid property value |
65321 | 0 | Invalid property path |
65322 | 0 | Invalid property value |
65323 | 0 | Invalid data type for '%s' |
65324 | 0 | Invalid string constant |
65325 | 0 | Line too long |
65326 | 0 | List capacity out of bounds (%d) |
65327 | 0 | List count out of bounds (%d) |
65328 | 0 | OLE error %.8x |
65329 | 0 | Method '%s' not supported by automation object |
65330 | 0 | Variant does not reference an automation object |
65331 | 0 | Dispatch methods do not support more than 64 parameters |
65332 | 0 | Ancestor for '%s' not found |
65333 | 0 | Cannot assign a %s to a %s |
65334 | 0 | Bits index out of range |
65335 | 0 | Can't write to a read-only resource stream |
65336 | 0 | ''%s'' expected |
65337 | 0 | CheckSynchronize called from thread $%x, which is NOT the main thread |
65338 | 0 | Class %s not found |
65339 | 0 | A class named %s already exists |
65340 | 0 | List does not allow duplicates ($0%x) |
65341 | 0 | A component named %s already exists |
65342 | 0 | String list does not allow duplicates |
65343 | 0 | Cannot create file "%s". %s |
65344 | 0 | Invalid index |
65345 | 0 | Unable to insert an item |
65346 | 0 | Invalid owner |
65347 | 0 | RichEdit line insertion error |
65348 | 0 | Failed to Load Stream |
65349 | 0 | Failed to Save Stream |
65350 | 0 | %s is already associated with %s |
65351 | 0 | %d is an invalid PageIndex value. PageIndex must be between 0 and %d |
65352 | 0 | This control requires version 4.70 or greater of COMCTL32.DLL |
65353 | 0 | Date exceeds maximum of %s |
65354 | 0 | Date is less than minimum of %s |
65355 | 0 | You must be in ShowCheckbox mode to set to this date |
65356 | 0 | Failed to set calendar date or time |
65357 | 0 | Failed to set maximum selection range |
65358 | 0 | Failed to set calendar min/max range |
65359 | 0 | Failed to set calendar selected range |
65360 | 0 | Invalid style handle |
65361 | 0 | Invalid style format |
65362 | 0 | VCL Style File |
65363 | 0 | Class '%s' is not registered for '%s' |
65364 | 0 | %s parameter cannot be nil |
65365 | 0 | A StyleHook class has not been registered for %s |
65366 | 0 | Feature not supported by this style |
65367 | 0 | Failed to clear tab control |
65368 | 0 | Failed to delete tab at index %d |
65369 | 0 | Failed to retrieve tab at index %d |
65370 | 0 | Failed to get object at index %d |
65371 | 0 | Failed to set tab "%s" at index %d |
65372 | 0 | Failed to set object at index %d |
65373 | 0 | MultiLine must be True when TabPosition is tpLeft or tpRight |
65374 | 0 | Invalid item level assignment |
65375 | 0 | Invalid level (%d) for item "%s" |
65376 | 0 | UTF-7 |
65377 | 0 | Cannot remove shell notification icon |
65378 | 0 | PageControl must first be assigned |
65379 | 0 | %s requires Windows Vista or later |
65380 | 0 | Button%d |
65381 | 0 | RadioButton%d |
65382 | 0 | Caption cannot be empty |
65383 | 0 | CategoryPanel must have a CategoryPanelGroup as its parent |
65384 | 0 | Only CategoryPanels can be inserted into a CategoryPanelGroup |
65385 | 0 | No help keyword specified. |
65386 | 0 | Unable to load style '%s' |
65387 | 0 | Unable to load styles: %s |
65388 | 0 | Style '%s' already registered |
65389 | 0 | Style class '%s' already registered |
65390 | 0 | Style '%s' not found |
65391 | 0 | Style class '%s' not found |
65392 | 0 | Length of value array must be >= length of prompt array |
65393 | 0 | Prompt array must not be empty |
65394 | 0 | &Username |
65395 | 0 | &Password |
65396 | 0 | &Domain |
65397 | 0 | Login |
65398 | 0 | Separator |
65399 | 0 | Error setting %s.Count |
65400 | 0 | Listbox (%s) style must be virtual in order to set Count |
65401 | 0 | No OnGetItem event handler assigned |
65402 | 0 | "%s" is an invalid path |
65403 | 0 | ANSI |
65404 | 0 | ASCII |
65405 | 0 | Unicode |
65406 | 0 | Big Endian Unicode |
65407 | 0 | UTF-8 |
65408 | 0 | Clipboard does not support Icons |
65409 | 0 | Cannot open clipboard: %s |
65410 | 0 | Text exceeds memo capacity |
65411 | 0 | Operation not supported on selected printer |
65412 | 0 | There is no default printer currently selected |
65413 | 0 | Menu '%s' is already being used by another form |
65414 | 0 | Picture: |
65415 | 0 | (%dx%d) |
65416 | 0 | Preview |
65417 | 0 | Cannot open AVI |
65418 | 0 | Docked control must have a name |
65419 | 0 | Error removing control from dock tree |
65420 | 0 | - Dock zone not found |
65421 | 0 | - Dock zone has no control |
65422 | 0 | Error loading dock zone from the stream. Expecting version %d, but found %d. |
65423 | 0 | Multiselect mode must be on for this feature |
65424 | 0 | End |
65425 | 0 | Home |
65426 | 0 | Left |
65427 | 0 | Up |
65428 | 0 | Right |
65429 | 0 | Down |
65430 | 0 | Ins |
65431 | 0 | Del |
65432 | 0 | Shift+ |
65433 | 0 | Ctrl+ |
65434 | 0 | Alt+ |
65435 | 0 | (None) |
65436 | 0 | Value must be between %d and %d |
65437 | 0 | All |
65438 | 0 | Unable to insert a line |
65439 | 0 | Invalid clipboard format |
65440 | 0 | Cancel |
65441 | 0 | &Help |
65442 | 0 | &Abort |
65443 | 0 | &Retry |
65444 | 0 | &Ignore |
65445 | 0 | &All |
65446 | 0 | N&o to All |
65447 | 0 | Yes to &All |
65448 | 0 | &Close |
65449 | 0 | BkSp |
65450 | 0 | Tab |
65451 | 0 | Esc |
65452 | 0 | Enter |
65453 | 0 | Space |
65454 | 0 | PgUp |
65455 | 0 | PgDn |
65456 | 0 | TIFF Images |
65457 | 0 | Grid too large for operation |
65458 | 0 | Too many rows or columns deleted |
65459 | 0 | Grid index out of range |
65460 | 0 | Fixed column count must be less than column count |
65461 | 0 | Fixed row count must be less than row count |
65462 | 0 | Cannot insert or delete rows from grid |
65463 | 0 | Invalid input value |
65464 | 0 | Invalid input value. Use escape key to abandon changes |
65465 | 0 | Warning |
65466 | 0 | Error |
65467 | 0 | Information |
65468 | 0 | Confirm |
65469 | 0 | &Yes |
65470 | 0 | &No |
65471 | 0 | OK |
65472 | 0 | &No |
65473 | 0 | &Help |
65474 | 0 | &Close |
65475 | 0 | &Ignore |
65476 | 0 | &Retry |
65477 | 0 | Abort |
65478 | 0 | &All |
65479 | 0 | Cannot drag a form |
65480 | 0 | An error returned from DDE ($0%x) |
65481 | 0 | DDE Error - conversation not established ($0%x) |
65482 | 0 | Error occurred when DDE ran out of memory ($0%x) |
65483 | 0 | Unable to connect DDE conversation |
65484 | 0 | Metafiles |
65485 | 0 | Enhanced Metafiles |
65486 | 0 | Icons |
65487 | 0 | Bitmaps |
65488 | 0 | Menu index out of range |
65489 | 0 | Menu inserted twice |
65490 | 0 | Sub-menu is not in menu |
65491 | 0 | Not enough timers available |
65492 | 0 | Printer is not currently printing |
65493 | 0 | Printing in progress |
65494 | 0 | Printer index out of range |
65495 | 0 | Printer selected is not valid |
65496 | 0 | %s on %s |
65497 | 0 | GroupIndex cannot be less than a previous menu item's GroupIndex |
65498 | 0 | Cannot create form. No MDI forms are currently active |
65499 | 0 | Can only modify an image if it contains a bitmap |
65500 | 0 | A control cannot have itself as its parent |
65501 | 0 | OK |
65502 | 0 | Cancel |
65503 | 0 | &Yes |
65504 | 0 | Invalid image size |
65505 | 0 | Invalid ImageList |
65506 | 0 | Unable to Replace Image |
65507 | 0 | Invalid ImageList Index |
65508 | 0 | Failed to read ImageList data from stream |
65509 | 0 | Failed to write ImageList data to stream |
65510 | 0 | Error creating window device context |
65511 | 0 | Error creating window class |
65512 | 0 | Cannot focus a disabled or invisible window |
65513 | 0 | Control '%s' has no parent window |
65514 | 0 | Parent given is not a parent of '%s' |
65515 | 0 | Cannot hide an MDI Child Form |
65516 | 0 | Cannot change Visible in OnShow or OnHide |
65517 | 0 | Cannot make a visible window modal |
65518 | 0 | Scrollbar property out of range |
65519 | 0 | %s property out of range |
65520 | 0 | Tab position incompatible with current tab style |
65521 | 0 | Tab style incompatible with current tab position |
65522 | 0 | Bitmap image is not valid |
65523 | 0 | Icon image is not valid |
65524 | 0 | Metafile is not valid |
65525 | 0 | Invalid pixel format |
65526 | 0 | Invalid image |
65527 | 0 | Scan line index out of range |
65528 | 0 | Cannot change the size of an icon |
65529 | 0 | Cannot change the size of a WIC Image |
65530 | 0 | Invalid operation on TOleGraphic |
65531 | 0 | Unknown picture file extension (.%s) |
65532 | 0 | Unsupported clipboard format |
65533 | 0 | Out of system resources |
65534 | 0 | Canvas does not allow drawing |
65535 | 0 | Text format flag '%s' not supported |